All MIBs › XYLO-MODEM-MIB › mdmCtlResetModemThresh
mdmCtlResetModemThresh
Module: XYLO-MODEM-MIB
OID (symbolic): XYLO-MODEM-MIB::mdmCtlResetModemThresh
OID (numeric): 1.3.6.1.4.1.15.2.100.4.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: After every configurable number (as specified by the modem_reset_threshold parameter) of consecutive failures on a modem, it will be reset. This will not affect the consecutive failure count which is already maintained for the modem_error_threshold Annex parameter, thereby working independent of the modem_error_threshold Annex parameter. This means that even though the modem will be reset, after every modem_reset_threshold consecutive failures, it will be put out of service when the number of consecutive modem failures exceeds the value specified by the modem_error_threshold paramter.
What is mdmCtlResetModemThresh?
This read-write integer (1-65535) sets how many consecutive call failures on a modem must occur before that modem is automatically reset, independent of the separate modem_error_threshold parameter that governs taking a modem out of service. An admin tunes this to control how aggressively the system self-heals flaky modems versus how quickly it gives up and marks them failed. Setting this to 5 means a modem failing five calls in a row gets reset automatically, even though it may still be pulled out of service later if failures continue past modem_error_threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.4 snmpwalk -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlResetModemThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.4.1 snmpget -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlResetModemThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.100.4.4.1 i <value>
Start monitoring Xylogics modem pool / remote access server (per-modem call-state/line-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-MODEM-MIB::mdmCtlResetModemThresh OID value, configure state conditions and alerts, and monitor any Xylogics modem pool / remote access server (per-modem call-state/line-quality status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.100 | anxModem | XYLO-MIB-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15.2.100.4 | mdmCtlObjects | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.4 | mdmCtlResetModemThresh | XYLO-MODEM-MIB |