All MIBs › XYLO-MODEM-MIB › mdmCtlReset
mdmCtlReset
Module: XYLO-MODEM-MIB
OID (symbolic): XYLO-MODEM-MIB::mdmCtlReset
OID (numeric): 1.3.6.1.4.1.15.2.100.4.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Does hardware reset on a specific modem. Executing this object will end any current session on the modem. However this object will not read or change the modem configuration. Reading this object will always return ready(1). This object is similar to NA/admin command 'reset int_modem modem#'. This object obsoletes the object anxpModemReset.
What is mdmCtlReset?
This read-write enumerated control object, set to execute(2), performs a hardware reset on the single modem identified by mdmNumber, ending any current session on it but leaving its configuration unchanged; it obsoletes the older anxpModemReset object. An admin uses this to recover one hung modem without affecting the rest of the chassis, corresponding to the NA/admin command 'reset int_modem modem#'. Reading this object always returns ready(1), so a technician must explicitly set it to execute(2) to reset modem number 7, for instance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.3.1.1 snmpwalk -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.3.1.1.1 snmpget -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.100.4.3.1.1.1 i <value>
Start monitoring Xylogics modem pool / remote access server (per-modem call-state/line-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-MODEM-MIB::mdmCtlReset OID value, configure state conditions and alerts, and monitor any Xylogics modem pool / remote access server (per-modem call-state/line-quality status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.100 | anxModem | XYLO-MIB-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15.2.100.4 | mdmCtlObjects | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.3 | mdmCtlTable | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.3.1 | mdmCtlEntry | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.3.1.1 | mdmCtlReset | XYLO-MODEM-MIB |