All MIBs › XYLO-MODEM-MIB › mdmCtlReadConfig
mdmCtlReadConfig
Module: XYLO-MODEM-MIB
OID (symbolic): XYLO-MODEM-MIB::mdmCtlReadConfig
OID (numeric): 1.3.6.1.4.1.15.2.100.4.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Read modem config file. Setting this object to execute(2) will not disrupt active calls. The new configuration information is passed to the modem when connecting the next call. This command is similar to the NA/admin command 'reset annex modem'. This object replaces the option modem(10) for the MIB object anxcReset.
What is mdmCtlReadConfig?
This read-write enumerated control object, set to execute(2), tells the device to reload its modem configuration file without disrupting any calls currently in progress, taking effect the next time each modem answers a call. It corresponds to the NA/admin command 'reset annex modem' and gives an admin a non-disruptive way to push modem config changes out. Setting this after editing dial-in modem parameters ensures the new settings apply to the next incoming call rather than requiring a full reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.2 snmpwalk -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlReadConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.2.1 snmpget -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlReadConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.100.4.2.1 i <value>
Start monitoring Xylogics modem pool / remote access server (per-modem call-state/line-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-MODEM-MIB::mdmCtlReadConfig OID value, configure state conditions and alerts, and monitor any Xylogics modem pool / remote access server (per-modem call-state/line-quality status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.100 | anxModem | XYLO-MIB-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15.2.100.4 | mdmCtlObjects | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.2 | mdmCtlReadConfig | XYLO-MODEM-MIB |