All MIBs › XYLAN-WSM-MIB › wsmPortT1E1StartingTimeSlot
wsmPortT1E1StartingTimeSlot
Module: XYLAN-WSM-MIB
OID (symbolic): XYLAN-WSM-MIB::wsmPortT1E1StartingTimeSlot
OID (numeric): 1.3.6.1.4.1.800.2.7.1.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Starting TimeSlot for Fractional T1E1 board. This is only use for Fractional T1E1 board type. Valid Range: T1: 1..24 E1: 1..31 (May need to skip 16) The valid range may be effected by wsmPortT1E1NumberOfTimeSlot too.
What is wsmPortT1E1StartingTimeSlot?
This value, from 1 to 31, sets the starting timeslot for a Fractional T1/E1 board, applying only to that board type; valid ranges are 1-24 for T1 and 1-31 for E1 (possibly skipping timeslot 16), and the valid range also depends on wsmPortT1E1NumberOfTimeSlot. Admins configure it to allocate a specific contiguous block of timeslots on a fractional T1/E1 circuit rather than using the full span. Setting wsmPortT1E1StartingTimeSlot to 1 with a small timeslot count reserves just the first few channels of the T1 for this fractional circuit, leaving the rest available elsewhere.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.7.1.1.1.10 snmpwalk -v2c -c public <target> XYLAN-WSM-MIB::wsmPortT1E1StartingTimeSlot
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.7.1.1.1.10.1 snmpget -v2c -c public <target> XYLAN-WSM-MIB::wsmPortT1E1StartingTimeSlot.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.7.1.1.1.10.1 i <value>
Start monitoring Xylan (Alcatel) OmniSwitch WSM (WAN Service Module) cards (T1/E1 timeslot allocation/clocking-polarity config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-WSM-MIB::wsmPortT1E1StartingTimeSlot OID value, configure state conditions and alerts, and monitor any Xylan (Alcatel) OmniSwitch WSM (WAN Service Module) cards (T1/E1 timeslot allocation/clocking-polarity config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.7 | xylanWsmArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.7.1 | wsmPortGroup | XYLAN-WSM-MIB |
| 1.3.6.1.4.1.800.2.7.1.1 | wsmPortTable | XYLAN-WSM-MIB |
| 1.3.6.1.4.1.800.2.7.1.1.1 | wsmPortEntry | XYLAN-WSM-MIB |
| 1.3.6.1.4.1.800.2.7.1.1.1.10 | wsmPortT1E1StartingTimeSlot | XYLAN-WSM-MIB |