All MIBs › XYLAN-WSM-MIB › wsmPortProtocol
wsmPortProtocol
Module: XYLAN-WSM-MIB
OID (symbolic): XYLAN-WSM-MIB::wsmPortProtocol
OID (numeric): 1.3.6.1.4.1.800.2.7.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The layer 2 protocol of the port.
This parameter only applies when wsmPortFunctionType is equal to frameType(1).
For ports that don't support this (e.g. Circuit Emulation T1 ports) only a value of none(1) is supported.
For ports that support upper layer protocols (frameType ports) a value other than none must be used.
What is wsmPortProtocol?
This setting selects the Layer 2 protocol running on the port, none, Frame Relay, or PPP, and only applies when wsmPortFunctionType is frameType; ports that don't support upper-layer protocols (like circuit-emulation T1 ports) only accept none. Admins configure it to match the WAN protocol actually negotiated with the far end of the link. Setting wsmPortProtocol to ppp(3) configures that frameType port to run PPP encapsulation rather than Frame Relay.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.7.1.1.1.8 snmpwalk -v2c -c public <target> XYLAN-WSM-MIB::wsmPortProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.7.1.1.1.8.1 snmpget -v2c -c public <target> XYLAN-WSM-MIB::wsmPortProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.7.1.1.1.8.1 i <value>
Start monitoring Xylan (Alcatel) OmniSwitch WSM (WAN Service Module) cards (T1/E1 timeslot allocation/clocking-polarity config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-WSM-MIB::wsmPortProtocol OID value, configure state conditions and alerts, and monitor any Xylan (Alcatel) OmniSwitch WSM (WAN Service Module) cards (T1/E1 timeslot allocation/clocking-polarity config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.7 | xylanWsmArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.7.1 | wsmPortGroup | XYLAN-WSM-MIB |
| 1.3.6.1.4.1.800.2.7.1.1 | wsmPortTable | XYLAN-WSM-MIB |
| 1.3.6.1.4.1.800.2.7.1.1.1 | wsmPortEntry | XYLAN-WSM-MIB |
| 1.3.6.1.4.1.800.2.7.1.1.1.8 | wsmPortProtocol | XYLAN-WSM-MIB |