XYLAN-VAP-MIB :: xVapAdmStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › XYLAN-VAP-MIB › xVapAdmStatus

xVapAdmStatus

Module: XYLAN-VAP-MIB

OID (symbolic): XYLAN-VAP-MIB::xVapAdmStatus

OID (numeric): 1.3.6.1.4.1.800.2.10.1.1

Node type: OBJECT-TYPE

Type: XylanVapAdminStatCodes

Access: read-write

Description: The administrative state which can be set by configuration. Disable(1) will disable VAP from running on this device. Enable(2) will enable VAP to run on this device. Partial will enable the adjacency portion of VAP only.

What is xVapAdmStatus?

This read-write object sets the administrative state of VAP (Virtual Adjacency Protocol): disable(1) stops VAP from running on this device, enable(2) fully enables it, and a partial setting enables only the adjacency-discovery portion. An admin uses this to control whether the switch participates in VAP-based neighbor discovery with adjacent OmniSwitches, or only performs partial adjacency detection without full VAP functionality. Setting it to enable(2) would turn on full VAP operation between this device and its adjacent OmniSwitch neighbors.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.10.1.1
snmpwalk -v2c -c public <target> XYLAN-VAP-MIB::xVapAdmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.10.1.1.1
snmpget -v2c -c public <target> XYLAN-VAP-MIB::xVapAdmStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.10.1.1.1 s <value>

Start monitoring Xylan/Alcatel OmniSwitch with dial-in/WAN access modules (Virtual Access Point admin/operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-VAP-MIB::xVapAdmStatus OID value, configure state conditions and alerts, and monitor any Xylan/Alcatel OmniSwitch with dial-in/WAN access modules (Virtual Access Point admin/operational status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.800xylanXYLAN-BASE-MIB
1.3.6.1.4.1.800.2xylanArchXYLAN-BASE-MIB
1.3.6.1.4.1.800.2.10xylanVapArchXYLAN-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.800.2.10.1xVapInfoXYLAN-VAP-MIB
1.3.6.1.4.1.800.2.10.1.1xVapAdmStatusXYLAN-VAP-MIB