All MIBs › XYLAN-SRTB-MIB › srtbExplorerTypeToSend
srtbExplorerTypeToSend
Module: XYLAN-SRTB-MIB
OID (symbolic): XYLAN-SRTB-MIB::srtbExplorerTypeToSend
OID (numeric): 1.3.6.1.4.1.800.2.24.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object specifies which explorer type to send when unknown destination, multicast or broadcast frame is forwarded from Ethernet to Token Ring. If notAvailable is returned (from GET), meaning SRTB is OFF, hence not available for users to configure.
What is srtbExplorerTypeToSend?
This read-write object selects which explorer frame type, typeARE(1) (All-Routes Explorer) or typeSTE(2) (Spanning-Tree Explorer), is sent when an unknown-destination, multicast, or broadcast frame is forwarded from Ethernet to Token Ring; a returned value of notAvailable(3) means SRTB is off. An admin sets this to match the explorer-frame convention used elsewhere in the Token Ring source-route bridged network, since ARE and STE affect how the frame is routed and replicated. Setting it to typeSTE(2) means unknown-destination Ethernet frames forwarded to Token Ring use Spanning-Tree Explorer frames rather than flooding as All-Routes Explorers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.24.1.1.1.4 snmpwalk -v2c -c public <target> XYLAN-SRTB-MIB::srtbExplorerTypeToSend
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.24.1.1.1.4.1 snmpget -v2c -c public <target> XYLAN-SRTB-MIB::srtbExplorerTypeToSend.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.24.1.1.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> srtbExplorerTypeToSend.1
Start monitoring Xylan/Alcatel OmniSwitch chassis, Token Ring/Ethernet bridging deployments (SRTB mode/forwarding-table config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-SRTB-MIB::srtbExplorerTypeToSend OID value, configure state conditions and alerts, and monitor any Xylan/Alcatel OmniSwitch chassis, Token Ring/Ethernet bridging deployments (SRTB mode/forwarding-table config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.24 | xylanSrtbArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.24.1 | xylanSRTB | XYLAN-SRTB-MIB |
| 1.3.6.1.4.1.800.2.24.1.1 | srtbConfigTable | XYLAN-SRTB-MIB |
| 1.3.6.1.4.1.800.2.24.1.1.1 | srtbConfigEntry | XYLAN-SRTB-MIB |
| 1.3.6.1.4.1.800.2.24.1.1.1.4 | srtbExplorerTypeToSend | XYLAN-SRTB-MIB |