All MIBs › XYLAN-SRTB-MIB › srtbEthernetRingId
srtbEthernetRingId
Module: XYLAN-SRTB-MIB
OID (symbolic): XYLAN-SRTB-MIB::srtbEthernetRingId
OID (numeric): 1.3.6.1.4.1.800.2.24.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Ring ID to be assigned to the Ethernet segment. Valid ring-id is from 0x001(1) to 0xFFF(4095). Users can set EthRingID from 1 to 4095. But for 0 which is read-only, is not avaliable for user to set. If 0 is returned (from GET), meaning SRTB is OFF, hence not available for users to configure.
What is srtbEthernetRingId?
This read-write object assigns a Token Ring ring ID (1 to 4095) to the Ethernet segment being bridged via SRTB; a returned value of 0 (read-only in that state) means SRTB is off and the object is not configurable. An admin sets this to the ring ID that the Ethernet segment should appear as when frames are translated into the Token Ring source-route domain. Setting it to 100 would make the Ethernet segment appear as ring 100 to Token Ring devices communicating across the SRTB bridge.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.24.1.1.1.3 snmpwalk -v2c -c public <target> XYLAN-SRTB-MIB::srtbEthernetRingId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.24.1.1.1.3.1 snmpget -v2c -c public <target> XYLAN-SRTB-MIB::srtbEthernetRingId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.24.1.1.1.3.1 i <value>
Start monitoring Xylan/Alcatel OmniSwitch chassis, Token Ring/Ethernet bridging deployments (SRTB mode/forwarding-table config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-SRTB-MIB::srtbEthernetRingId OID value, configure state conditions and alerts, and monitor any Xylan/Alcatel OmniSwitch chassis, Token Ring/Ethernet bridging deployments (SRTB mode/forwarding-table config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.24 | xylanSrtbArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.24.1 | xylanSRTB | XYLAN-SRTB-MIB |
| 1.3.6.1.4.1.800.2.24.1.1 | srtbConfigTable | XYLAN-SRTB-MIB |
| 1.3.6.1.4.1.800.2.24.1.1.1 | srtbConfigEntry | XYLAN-SRTB-MIB |
| 1.3.6.1.4.1.800.2.24.1.1.1.3 | srtbEthernetRingId | XYLAN-SRTB-MIB |