All MIBs › XYLAN-PORT-MIB › vportBrdgMode
vportBrdgMode
Module: XYLAN-PORT-MIB
OID (symbolic): XYLAN-PORT-MIB::vportBrdgMode
OID (numeric): 1.3.6.1.4.1.800.2.3.1.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If vportFuncType is either localBridge(1) or localOpSwitch(2) type, setting this field to autoSwitch(3), the default, will allow the port to switch between the localBridge(1) or localOpSwitch(2) mode. The forceBridge(4) mode will prevent the localBridge(1) mode to switch to localOpSwitch(2) mode even there is only one MAC address is detacted. The forceSwitch(5) mode prevents the localOpSwitch(2) mode to switch to localBridge(1) mode. The user would have to make sure no loop is formed in the network in this case. The default is autoSwitch(3).
What is vportBrdgMode?
Controls how a port that supports both localBridge and localOpSwitch modes decides between them: autoSwitch(3, the default) lets it switch automatically, forceBridge(4) locks it in bridge mode even with only one MAC detected, and forceSwitch(5) locks it in switch-optimized mode (admins must then ensure no network loop exists). This setting only applies when vportFuncType is localBridge or localOpSwitch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.3.1.1.1.10 snmpwalk -v2c -c public <target> XYLAN-PORT-MIB::vportBrdgMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.3.1.1.1.10.1 snmpget -v2c -c public <target> XYLAN-PORT-MIB::vportBrdgMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.3.1.1.1.10.1 i <value>
Start monitoring Xylan OmniSwitch Ethernet switch (per-port admin/oper status, speed/duplex, VLAN-membership config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-PORT-MIB::vportBrdgMode OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch Ethernet switch (per-port admin/oper status, speed/duplex, VLAN-membership config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.3 | xylanVportArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.3.1 | virtualPort | XYLAN-PORT-MIB |
| 1.3.6.1.4.1.800.2.3.1.1 | vportTable | XYLAN-PORT-MIB |
| 1.3.6.1.4.1.800.2.3.1.1.1 | vportEntry | XYLAN-PORT-MIB |
| 1.3.6.1.4.1.800.2.3.1.1.1.10 | vportBrdgMode | XYLAN-PORT-MIB |