All MIBs › XYLAN-OAM-MIB › xylanOamF5VCRdiEnable
xylanOamF5VCRdiEnable
Module: XYLAN-OAM-MIB
OID (symbolic): XYLAN-OAM-MIB::xylanOamF5VCRdiEnable
OID (numeric): 1.3.6.1.4.1.800.2.28.1.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A value to indicate whether RDI transmission is enabled or disabled for this VC connection.
What is xylanOamF5VCRdiEnable?
This read-write enable/disable flag controls whether RDI (Remote Defect Indication) cell transmission is turned on for this VC connection. Enabling it lets the switch notify the far end that a defect was detected in traffic direction toward them on this specific virtual channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.28.1.2.1.7 snmpwalk -v2c -c public <target> XYLAN-OAM-MIB::xylanOamF5VCRdiEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.28.1.2.1.7.1 snmpget -v2c -c public <target> XYLAN-OAM-MIB::xylanOamF5VCRdiEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.28.1.2.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> xylanOamF5VCRdiEnable.1
Start monitoring Xylan/Alcatel OmniSwitch ATM switch (ATM OAM loopback/fault-detection flow status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-OAM-MIB::xylanOamF5VCRdiEnable OID value, configure state conditions and alerts, and monitor any Xylan/Alcatel OmniSwitch ATM switch (ATM OAM loopback/fault-detection flow status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.28 | xylanOamArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.28.1 | xylanOam | XYLAN-OAM-MIB |
| 1.3.6.1.4.1.800.2.28.1.2 | xylanOamF5VCTable | XYLAN-OAM-MIB |
| 1.3.6.1.4.1.800.2.28.1.2.1 | xylanOamF5VCEntry | XYLAN-OAM-MIB |
| 1.3.6.1.4.1.800.2.28.1.2.1.7 | xylanOamF5VCRdiEnable | XYLAN-OAM-MIB |