All MIBs › XYLAN-OAM-MIB › xylanOamF4VPTrapOnAlarmEnable
xylanOamF4VPTrapOnAlarmEnable
Module: XYLAN-OAM-MIB
OID (symbolic): XYLAN-OAM-MIB::xylanOamF4VPTrapOnAlarmEnable
OID (numeric): 1.3.6.1.4.1.800.2.28.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A value to indicate whether ATM Layer Trap generation on alarms is enabled or disabled for this VP connection.
What is xylanOamF4VPTrapOnAlarmEnable?
This read-write enable/disable flag controls whether an ATM-layer SNMP trap is generated when an alarm condition occurs on this VP connection. Admins enable this so OAM-detected failures on a virtual path (like AIS/RDI events) actively page a monitoring system instead of only being visible on polling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.28.1.1.1.8 snmpwalk -v2c -c public <target> XYLAN-OAM-MIB::xylanOamF4VPTrapOnAlarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.28.1.1.1.8.1 snmpget -v2c -c public <target> XYLAN-OAM-MIB::xylanOamF4VPTrapOnAlarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.28.1.1.1.8.1 i <value>
Start monitoring Xylan/Alcatel OmniSwitch ATM switch (ATM OAM loopback/fault-detection flow status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-OAM-MIB::xylanOamF4VPTrapOnAlarmEnable OID value, configure state conditions and alerts, and monitor any Xylan/Alcatel OmniSwitch ATM switch (ATM OAM loopback/fault-detection flow status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.28 | xylanOamArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.28.1 | xylanOam | XYLAN-OAM-MIB |
| 1.3.6.1.4.1.800.2.28.1.1 | xylanOamF4VPTable | XYLAN-OAM-MIB |
| 1.3.6.1.4.1.800.2.28.1.1.1 | xylanOamF4VPEntry | XYLAN-OAM-MIB |
| 1.3.6.1.4.1.800.2.28.1.1.1.8 | xylanOamF4VPTrapOnAlarmEnable | XYLAN-OAM-MIB |