All MIBs › XYLAN-FRAME-RELAY-MIB › frxVcControlCompressionOperPhase
frxVcControlCompressionOperPhase
Module: XYLAN-FRAME-RELAY-MIB
OID (symbolic): XYLAN-FRAME-RELAY-MIB::frxVcControlCompressionOperPhase
OID (numeric): 1.3.6.1.4.1.800.2.8.2.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object reports the current phase (state) of compression for this virtual circuit if the Compression Admin Status is set to enable.
If the compression Admin status is set to disabled, then this object will report as disabled. Otherwise the value reflects whether compression is currently inactive or failed negotiation (disabled) is under negotiation (initialization) or active (operation). Possible causes of disabled are a failed negotiation, virtual circuit inactive, the other side not supporting compression, etc.
For a description of the phases (states), see Frame Relay Forum Implementation aggreement on Data Compression (FRF.9)
What is frxVcControlCompressionOperPhase?
This reports the current FRF.9 compression negotiation phase for this virtual circuit: disabled (off, or negotiation failed), initialization (negotiating), or operation (compression actively running). It always reads disabled when frxVcControlCompressionAdminStatus is set to disable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.8.2.1.1.5 snmpwalk -v2c -c public <target> XYLAN-FRAME-RELAY-MIB::frxVcControlCompressionOperPhase
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.8.2.1.1.5.1 snmpget -v2c -c public <target> XYLAN-FRAME-RELAY-MIB::frxVcControlCompressionOperPhase.1
Start monitoring Xylan OmniSwitch device (legacy Frame Relay PVC/DLCI admin-status/traffic-shaping config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-FRAME-RELAY-MIB::frxVcControlCompressionOperPhase OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch device (legacy Frame Relay PVC/DLCI admin-status/traffic-shaping config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.8 | xylanFrArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.8.2 | frxVcControlGroup | XYLAN-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.800.2.8.2.1 | frxVcControlTable | XYLAN-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.800.2.8.2.1.1 | frxVcControlEntry | XYLAN-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.800.2.8.2.1.1.5 | frxVcControlCompressionOperPhase | XYLAN-FRAME-RELAY-MIB |