XYLAN-DS3-MIB :: dsx3PortConfigTxPayloadType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsXYLAN-DS3-MIBdsx3PortConfigTxPayloadType

dsx3PortConfigTxPayloadType

Module: XYLAN-DS3-MIB

OID (symbolic): XYLAN-DS3-MIB::dsx3PortConfigTxPayloadType

OID (numeric): 1.3.6.1.4.1.800.2.11.2.1.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The object reflects the value to be inserted in the payload type bits (bit 3,4,5 of Maintenance and Adaptation byte) of an E3 G.832 frame. This objects only applies to E3 port whose framing is configured as G.832. Additionally if this object is not applicable, i.e. not E3 G.832, writing to this object will be silently ignored.

What is dsx3PortConfigTxPayloadType?

This read-write setting selects the payload-type bits to transmit (bits 3-5 of the Maintenance and Adaptation byte) in an E3 G.832 frame, such as atm or equipped-non-specific; writes are silently ignored on a port not framed as G.832 E3. An admin sets this to atm when the port should advertise ATM cell payload to the far end over a G.832-framed E3 circuit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.11.2.1.1.10
snmpwalk -v2c -c public <target> XYLAN-DS3-MIB::dsx3PortConfigTxPayloadType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.11.2.1.1.10.1
snmpget -v2c -c public <target> XYLAN-DS3-MIB::dsx3PortConfigTxPayloadType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.11.2.1.1.10.1 i <value>

Start monitoring Xylan (Alcatel) OmniSwitch equipment, DS3/E3 interfaces (payload-type/trail-trace/LOS-OOF-AIS alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-DS3-MIB::dsx3PortConfigTxPayloadType OID value, configure state conditions and alerts, and monitor any Xylan (Alcatel) OmniSwitch equipment, DS3/E3 interfaces (payload-type/trail-trace/LOS-OOF-AIS alarm status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.800xylanXYLAN-BASE-MIB
1.3.6.1.4.1.800.2xylanArchXYLAN-BASE-MIB
1.3.6.1.4.1.800.2.11xylanPportArchXYLAN-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.800.2.11.2dsx3PortXYLAN-DS3-MIB
1.3.6.1.4.1.800.2.11.2.1dsx3PortConfigTableXYLAN-DS3-MIB
1.3.6.1.4.1.800.2.11.2.1.1dsx3PortConfigEntryXYLAN-DS3-MIB
1.3.6.1.4.1.800.2.11.2.1.1.10dsx3PortConfigTxPayloadTypeXYLAN-DS3-MIB