All MIBs › XYLAN-DS3-MIB › dsx3PortConfigExpectedTrailTraceID
dsx3PortConfigExpectedTrailTraceID
Module: XYLAN-DS3-MIB
OID (symbolic): XYLAN-DS3-MIB::dsx3PortConfigExpectedTrailTraceID
OID (numeric): 1.3.6.1.4.1.800.2.11.2.1.1.14
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The object indicates the expected characters received as Trail Trace Identifier of an E3 G.832 frame. This object only applies to E3 port whose framing is configured as G.832. A binary 0 in the first octet indicates all zeros insertion, or this port is not configured as E3 G.832 framing. Additionally if this object is not applicable, i.e. not E3 G.832, writing to this object will be silently ignored.
What is dsx3PortConfigExpectedTrailTraceID?
This read-write string (up to 15 characters) sets the Trail Trace Identifier this port expects to receive on a G.832-framed E3 signal; writes are silently ignored on a port not framed as G.832 E3. An admin configures this so a mismatch against dsx3PortConfigRxTrailTraceID (flagged in dsx3PortConfigLineStatus bit 16) will automatically indicate a misrouted or misconnected E3 circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.11.2.1.1.14 snmpwalk -v2c -c public <target> XYLAN-DS3-MIB::dsx3PortConfigExpectedTrailTraceID
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.11.2.1.1.14.1 snmpget -v2c -c public <target> XYLAN-DS3-MIB::dsx3PortConfigExpectedTrailTraceID.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.11.2.1.1.14.1 s <value>
Start monitoring Xylan (Alcatel) OmniSwitch equipment, DS3/E3 interfaces (payload-type/trail-trace/LOS-OOF-AIS alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-DS3-MIB::dsx3PortConfigExpectedTrailTraceID OID value, configure state conditions and alerts, and monitor any Xylan (Alcatel) OmniSwitch equipment, DS3/E3 interfaces (payload-type/trail-trace/LOS-OOF-AIS alarm status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.11 | xylanPportArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.11.2 | dsx3Port | XYLAN-DS3-MIB |
| 1.3.6.1.4.1.800.2.11.2.1 | dsx3PortConfigTable | XYLAN-DS3-MIB |
| 1.3.6.1.4.1.800.2.11.2.1.1 | dsx3PortConfigEntry | XYLAN-DS3-MIB |
| 1.3.6.1.4.1.800.2.11.2.1.1.14 | dsx3PortConfigExpectedTrailTraceID | XYLAN-DS3-MIB |