All MIBs › XYLAN-DS1-MIB › dsx1PortConfigYelAlarmDetectEnable
dsx1PortConfigYelAlarmDetectEnable
Module: XYLAN-DS1-MIB
OID (symbolic): XYLAN-DS1-MIB::dsx1PortConfigYelAlarmDetectEnable
OID (numeric): 1.3.6.1.4.1.800.2.11.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates whether Yellow Alarm should be detected.
What is dsx1PortConfigYelAlarmDetectEnable?
Enables or disables detection of Yellow Alarm on this DS1/E1 port. An admin disables this only in specific troubleshooting scenarios where Yellow Alarm reporting would otherwise create noise; it's normally left enabled so remote-end alarm conditions are properly surfaced.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.11.1.1.1.6 snmpwalk -v2c -c public <target> XYLAN-DS1-MIB::dsx1PortConfigYelAlarmDetectEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.11.1.1.1.6.1 snmpget -v2c -c public <target> XYLAN-DS1-MIB::dsx1PortConfigYelAlarmDetectEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.11.1.1.1.6.1 i <value>
Start monitoring Xylan OmniSwitch LAN switch, DS1/T1 interface module (framing/errored-second/unavailable-second status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-DS1-MIB::dsx1PortConfigYelAlarmDetectEnable OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch LAN switch, DS1/T1 interface module (framing/errored-second/unavailable-second status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.11 | xylanPportArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.11.1 | dsx1Port | XYLAN-DS1-MIB |
| 1.3.6.1.4.1.800.2.11.1.1 | dsx1PortConfigTable | XYLAN-DS1-MIB |
| 1.3.6.1.4.1.800.2.11.1.1.1 | dsx1PortConfigEntry | XYLAN-DS1-MIB |
| 1.3.6.1.4.1.800.2.11.1.1.1.6 | dsx1PortConfigYelAlarmDetectEnable | XYLAN-DS1-MIB |