All MIBs › XYLAN-CSM-MIB › xylnatmTrafficShaperConfSCR
xylnatmTrafficShaperConfSCR
Module: XYLAN-CSM-MIB
OID (symbolic): XYLAN-CSM-MIB::xylnatmTrafficShaperConfSCR
OID (numeric): 1.3.6.1.4.1.800.2.9.1.18.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object is used to configure the Sustainable Cell Rate of a shaper.
SCR is the average conforming cell rate an ATM connection measured over a time interval. This measurement allows the network to allocate sufficient resources that are less than those based on PCR and still ensure the achievement of the desired QOS.
SCR could be unspecified, value set to 0. If specified, SCR value must be less than the PCR value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.9.1.18.1.1.6 snmpwalk -v2c -c public <target> XYLAN-CSM-MIB::xylnatmTrafficShaperConfSCR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.9.1.18.1.1.6.1 snmpget -v2c -c public <target> XYLAN-CSM-MIB::xylnatmTrafficShaperConfSCR.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.9.1.18.1.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.9 | xylanCsmArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.9.1 | xylanCsmMIB | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.18 | xylnatmTrafficShaperConfGroup | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.18.1 | xylnatmTrafficShaperConfTable | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.18.1.1 | xylnatmTrafficShaperConfEntry | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.6 | xylnatmTrafficShaperConfSCR | XYLAN-CSM-MIB |