XYLAN-CSM-MIB :: xylnatmTrafficShaperConfPCR

MIB Reference — IPNetwork Monitor

All MIBsXYLAN-CSM-MIBxylnatmTrafficShaperConfPCR

xylnatmTrafficShaperConfPCR

Module: XYLAN-CSM-MIB

OID (symbolic): XYLAN-CSM-MIB::xylnatmTrafficShaperConfPCR

OID (numeric): 1.3.6.1.4.1.800.2.9.1.18.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

This object is used to configure the Peak Cell Rate of a shaper.

PCR is one of the parameters set to alter the characteristics of the cell streams to acquire a desired QOS objective. It is the maximum instantaneous cell rate at which the cell streams are transmited.

PCR must be greater than 0 and not exceeds the maximum bandwidth of the physical interface. The bandwidth of the physical interface is devided up to 8 shapers, by default, shaper 8 has the highest bandwidth. PCR value must not exceed the remaining bandwidth of the interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.9.1.18.1.1.5
snmpwalk -v2c -c public <target> XYLAN-CSM-MIB::xylnatmTrafficShaperConfPCR

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.9.1.18.1.1.5.1
snmpget -v2c -c public <target> XYLAN-CSM-MIB::xylnatmTrafficShaperConfPCR.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.9.1.18.1.1.5.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.800xylanXYLAN-BASE-MIB
1.3.6.1.4.1.800.2xylanArchXYLAN-BASE-MIB
1.3.6.1.4.1.800.2.9xylanCsmArchXYLAN-BASE-MIB
1.3.6.1.4.1.800.2.9.1xylanCsmMIBXYLAN-CSM-MIB
1.3.6.1.4.1.800.2.9.1.18xylnatmTrafficShaperConfGroupXYLAN-CSM-MIB
1.3.6.1.4.1.800.2.9.1.18.1xylnatmTrafficShaperConfTableXYLAN-CSM-MIB
1.3.6.1.4.1.800.2.9.1.18.1.1xylnatmTrafficShaperConfEntryXYLAN-CSM-MIB
1.3.6.1.4.1.800.2.9.1.18.1.1.5xylnatmTrafficShaperConfPCRXYLAN-CSM-MIB