All MIBs › XYLAN-CSM-MIB › xylnatmClockingxSrcType
xylnatmClockingxSrcType
Module: XYLAN-CSM-MIB
OID (symbolic): XYLAN-CSM-MIB::xylnatmClockingxSrcType
OID (numeric): 1.3.6.1.4.1.800.2.9.1.17.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object controls the type of clock used as the source for the bus line.
If 'notConfigured', then this source isn't configured.
If 'receiveDataDerived' then the source of the clock comes from the specified port's receive data (e.g. calculated using a Phase Lock loop off the receive data line).
If 'onboardOscillator' then the source of the clock comes from the on-board oscillator associated with this port. Currently (as of release 3.2) this is only valid with 19.44 Mhz clocking, and not valid for 8 Khz clocking.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.9.1.17.1.1.4 snmpwalk -v2c -c public <target> XYLAN-CSM-MIB::xylnatmClockingxSrcType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.9.1.17.1.1.4.1 snmpget -v2c -c public <target> XYLAN-CSM-MIB::xylnatmClockingxSrcType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.9.1.17.1.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.9 | xylanCsmArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.9.1 | xylanCsmMIB | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.17 | xylnatmClockingxCtrlGroup | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.17.1 | xylnatmClockingxCtrlTable | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.17.1.1 | xylnatmClockingxCtrlEntry | XYLAN-CSM-MIB |
| 1.3.6.1.4.1.800.2.9.1.17.1.1.4 | xylnatmClockingxSrcType | XYLAN-CSM-MIB |