All MIBs › XYLAN-ATM-MIB › atmxServiceLaneCfgTblIdx

atmxServiceLaneCfgTblIdx

OID (symbolic): XYLAN-ATM-MIB::atmxServiceLaneCfgTblIdx

OID (numeric): 1.3.6.1.4.1.800.2.4.2.1.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Index to the LAN Emulation Configuration Table. This index is only used when the Service type is ATM LAN Emulation. For other service type this should be set to zero (0).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.4.2.1.1.16
snmpwalk -v2c -c public <target> XYLAN-ATM-MIB::atmxServiceLaneCfgTblIdx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.4.2.1.1.16.1
snmpget -v2c -c public <target> XYLAN-ATM-MIB::atmxServiceLaneCfgTblIdx.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.4.2.1.1.16.1 i <value>

Start monitoring Xylan OmniSwitch ATM switch (per-interface VCC/VPC cell-traffic/discard status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-ATM-MIB::atmxServiceLaneCfgTblIdx OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch ATM switch (per-interface VCC/VPC cell-traffic/discard status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.800	xylan	XYLAN-BASE-MIB
1.3.6.1.4.1.800.2	xylanArch	XYLAN-BASE-MIB
1.3.6.1.4.1.800.2.4	xylanAtmArch	XYLAN-BASE-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.800.2.4.2	atmxServiceGroup	XYLAN-ATM-MIB
1.3.6.1.4.1.800.2.4.2.1	atmxServiceTable	XYLAN-ATM-MIB
1.3.6.1.4.1.800.2.4.2.1.1	atmxServiceEntry	XYLAN-ATM-MIB
1.3.6.1.4.1.800.2.4.2.1.1.16	atmxServiceLaneCfgTblIdx	XYLAN-ATM-MIB

XYLAN-ATM-MIB :: atmxServiceLaneCfgTblIdx

atmxServiceLaneCfgTblIdx

Module

This MIB depends on