All MIBs › XPNNI-MIB › pnnixRtstOutboundPort
pnnixRtstOutboundPort
Module: XPNNI-MIB
OID (symbolic): XPNNI-MIB::pnnixRtstOutboundPort
OID (numeric): 1.3.6.1.4.1.800.3.2.1.1.4.1.1.1.6
Node type: OBJECT-TYPE
Type: PnnixPortId
Access: read-only
Description: If error is set to success, this indicates the outbound port of the route lookup confirmation.
If this is set to 0, then this indicates the call was placed to this switching system's pnnixNodeIndex.
If this is set to 1, then this indicates the call was placed to a reachability which matched this node's summary address. In this event, the IAdj table would be consulted to determine the actual port (if any) where the destination resided.
If set to any other value, it indicates the pnni advertised port of the static route which caused this port to be returned.
What is pnnixRtstOutboundPort?
Read-only outbound port resulting from a successful route-test lookup: 0 means the call resolves to this switch's own node, 1 means it matches this node's summary address (requiring an IAdj table lookup for the real port), and any other value is the PNNI-advertised port of the matching static route.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.4.1.1.1.6 snmpwalk -v2c -c public <target> XPNNI-MIB::pnnixRtstOutboundPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.4.1.1.1.6.1 snmpget -v2c -c public <target> XPNNI-MIB::pnnixRtstOutboundPort.1
Start monitoring ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPNNI-MIB::pnnixRtstOutboundPort OID value, configure state conditions and alerts, and monitor any ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3 | xylanProduct | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2 | xylanSoftware | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2.1 | xylanPnni | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.3.2.1.1 | pnnixMIB | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.4 | pnniTestMIBObjects | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.4.1 | pnniRtstMIBGroup | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.4.1.1 | pnnixRtstTable | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.4.1.1.1 | pnnixRtstEntry | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.4.1.1.1.6 | pnnixRtstOutboundPort | XPNNI-MIB |