All MIBs › XPNNI-MIB › pnnixRouteAddrType
pnnixRouteAddrType
Module: XPNNI-MIB
OID (symbolic): XPNNI-MIB::pnnixRouteAddrType
OID (numeric): 1.3.6.1.4.1.800.3.2.1.1.1.19.4.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The type (e.g. internal or exterior) of reachability from the advertising node to the address prefix.
Reject(2) refers to an address prefix which, if matched, indicates that the message should be discarded as unreachable. This is used in some protocols as a means of correctly aggregating routes.
What is pnnixRouteAddrType?
Read-write classification of reachability from the advertising node to this address prefix: other, reject (discards matching traffic as unreachable, used for route aggregation), internal, or exterior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.1.19.4.1.7 snmpwalk -v2c -c public <target> XPNNI-MIB::pnnixRouteAddrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.1.19.4.1.7.1 snmpget -v2c -c public <target> XPNNI-MIB::pnnixRouteAddrType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.3.2.1.1.1.19.4.1.7.1 i <value>
Start monitoring ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPNNI-MIB::pnnixRouteAddrType OID value, configure state conditions and alerts, and monitor any ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3 | xylanProduct | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2 | xylanSoftware | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2.1 | xylanPnni | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.3.2.1.1 | pnnixMIB | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1 | pnnixMIBObjects | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.19 | pnnixRoutingGroup | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.19.4 | pnnixRouteAddrTable | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.19.4.1 | pnnixRouteAddrEntry | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.19.4.1.7 | pnnixRouteAddrType | XPNNI-MIB |