All MIBs › XPNNI-MIB › pnnixNodeId
pnnixNodeId
Module: XPNNI-MIB
OID (symbolic): XPNNI-MIB::pnnixNodeId
OID (numeric): 1.3.6.1.4.1.800.3.2.1.1.1.2.1.3
Node type: OBJECT-TYPE
Type: PnnixNodeId
Access: read-write
Description: The value the switching system is using to represent itself as this node. This object may only be written when pnnixNodeAdminStatus has the value down.
If pnnixNodeLowest is true, then the default node ID takes the form defined in Section 5.3.3 for lowest level nodes, with the first octet equal to pnnixNodeLevel, the second octet equal to 160, and the last 20 octets equal to pnnixNodeAtmAddress.
If pnnixNodeLowest is false, then the default node ID takes the form defined in Section 5.3.3 for logical group nodes, with the first octet equal to pnnixNodeLevel, the next fourteen octets equal to the value of pnnixNodePeerGroupId for the child node whose election as PGL causes this LGN to be instantiated, the next six octets equal to the ESI of pnnixNodeAtmAddress, and the last octet equal to zero.
What is pnnixNodeId?
Read-write value this switch uses to represent itself as a PNNI node, derived by default from pnnixNodeLevel and either pnnixNodeAtmAddress (lowest-level node) or the peer group leader's ID (logical group node); can only be set while the node is administratively down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.1.2.1.3 snmpwalk -v2c -c public <target> XPNNI-MIB::pnnixNodeId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.1.2.1.3.1 snmpget -v2c -c public <target> XPNNI-MIB::pnnixNodeId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.3.2.1.1.1.2.1.3.1 s <value>
Start monitoring ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPNNI-MIB::pnnixNodeId OID value, configure state conditions and alerts, and monitor any ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3 | xylanProduct | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2 | xylanSoftware | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2.1 | xylanPnni | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.3.2.1.1 | pnnixMIB | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1 | pnnixMIBObjects | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.2 | pnnixNodeTable | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.2.1 | pnnixNodeEntry | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.2.1.3 | pnnixNodeId | XPNNI-MIB |