All MIBs › XPNNI-MIB › pnnixNodeHelloInactivityFactor
pnnixNodeHelloInactivityFactor
Module: XPNNI-MIB
OID (symbolic): XPNNI-MIB::pnnixNodeHelloInactivityFactor
OID (numeric): 1.3.6.1.4.1.800.3.2.1.1.1.4.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value for the Hello Inactivity factor that this node will use to determine when a neighbor has gone down.
What is pnnixNodeHelloInactivityFactor?
Read-write multiplier this node uses against the Hello interval to determine when a neighbor is considered down; an admin lowers this to detect neighbor failure faster at the cost of more sensitivity to transient loss.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.1.4.1.4 snmpwalk -v2c -c public <target> XPNNI-MIB::pnnixNodeHelloInactivityFactor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.3.2.1.1.1.4.1.4.1 snmpget -v2c -c public <target> XPNNI-MIB::pnnixNodeHelloInactivityFactor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.3.2.1.1.1.4.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> pnnixNodeHelloInactivityFactor.1
Start monitoring ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPNNI-MIB::pnnixNodeHelloInactivityFactor OID value, configure state conditions and alerts, and monitor any ATM switch, ATM PNNI routing node (DTL/crankback/alternate-route/route-failure counter status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3 | xylanProduct | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2 | xylanSoftware | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.3.2.1 | xylanPnni | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.3.2.1.1 | pnnixMIB | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1 | pnnixMIBObjects | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.4 | pnnixNodeTimerTable | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.4.1 | pnnixNodeTimerEntry | XPNNI-MIB |
| 1.3.6.1.4.1.800.3.2.1.1.1.4.1.4 | pnnixNodeHelloInactivityFactor | XPNNI-MIB |