All MIBs › XEROX-COMMON-MIB › xcmRsrcGeneralFontTypeSupport
xcmRsrcGeneralFontTypeSupport
Module: XEROX-COMMON-MIB
OID (symbolic): XEROX-COMMON-MIB::xcmRsrcGeneralFontTypeSupport
OID (numeric): 1.3.6.1.4.1.253.8.57.1.1.1.9
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description:
Indicates all of the font types which are supported for use by this host system, specified in a bit-array. Usage: This bit-array is constructed from the set of supported values from 'XcmFontType', used as powers of 2 with big-endian rules - the high-order bit of the first octet corresponds to a font type of '0' (reserved) - the low-order bit of the first octet corresponds to a font type of '7'. Similar to the BITS pseudotype defined in IETF SMIv2 (RFC 2578), which has the same bit ordering rules but requires definitions for contiguous enumerated bits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.253.8.57.1.1.1.9 snmpwalk -v2c -c public <target> XEROX-COMMON-MIB::xcmRsrcGeneralFontTypeSupport
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.253.8.57.1.1.1.9.1 snmpget -v2c -c public <target> XEROX-COMMON-MIB::xcmRsrcGeneralFontTypeSupport.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.253 | xerox | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8 | xeroxCommonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57 | xcmRsrcMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1 | xcmRsrcGeneral | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1 | xcmRsrcGeneralTable | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1.1 | xcmRsrcGeneralEntry | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1.1.9 | xcmRsrcGeneralFontTypeSupport | XEROX-COMMON-MIB |