All MIBs › XEROX-COMMON-MIB › xcmRsrcGeneralFontTypeAccept
xcmRsrcGeneralFontTypeAccept
Module: XEROX-COMMON-MIB
OID (symbolic): XEROX-COMMON-MIB::xcmRsrcGeneralFontTypeAccept
OID (numeric): 1.3.6.1.4.1.253.8.57.1.1.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Indicates all of the font types which are accepted for dynamic delivery to and use by this host system, specified in a bit-array. Usage: This bit-array is constructed from the set of supported values from 'XcmFontType', used as powers of 2 with big-endian rules - the high-order bit of the first octet corresponds to a font type of '0' (reserved) - the low-order bit of the first octet corresponds to a font type of '7'. Similar to the BITS pseudotype defined in IETF SMIv2 (RFC 2578), which has the same bit ordering rules but requires definitions for contiguous enumerated bits.
What is xcmRsrcGeneralFontTypeAccept?
This OID holds a bit-array (a set of on/off flags) that describes which font formats a device can accept and use when fonts are delivered remotely. The flags indicate compatibility with different font types the system can dynamically load. A network manager would check this to know which font formats they can send to the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.253.8.57.1.1.1.7 snmpwalk -v2c -c public <target> XEROX-COMMON-MIB::xcmRsrcGeneralFontTypeAccept
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.253.8.57.1.1.1.7.1 snmpget -v2c -c public <target> XEROX-COMMON-MIB::xcmRsrcGeneralFontTypeAccept.1
Start monitoring Xerox printers and multifunction devices, XCMI foundational module (shared 64-bit counter/gauge type definitions, no device-specific data) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEROX-COMMON-MIB::xcmRsrcGeneralFontTypeAccept OID value, configure state conditions and alerts, and monitor any Xerox printers and multifunction devices, XCMI foundational module (shared 64-bit counter/gauge type definitions, no device-specific data) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.253 | xerox | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8 | xeroxCommonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57 | xcmRsrcMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1 | xcmRsrcGeneral | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1 | xcmRsrcGeneralTable | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1.1 | xcmRsrcGeneralEntry | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1.1.7 | xcmRsrcGeneralFontTypeAccept | XEROX-COMMON-MIB |