All MIBs › XEROX-COMMON-MIB › xcmHrDevAlertV2Event

xcmHrDevAlertV2Event

OID (symbolic): XEROX-COMMON-MIB::xcmHrDevAlertV2Event

OID (numeric): 1.3.6.1.4.1.253.8.53.17.1.0.1

Node type: NOTIFICATION-TYPE

Description: This trap is sent whenever a device alert row transitions to 'active' row status or (optionally) transitions to 'notInService' row status in 'xcmHrDevAlertTable'. This trap is sent when requested by a prior subscription. Note: The variable-bindings of this trap have been chosen to specify a complete device alert event while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The device's 'hrDeviceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by devices of interest. Systems MAY add other variable-bindings from any MIB.

What is xcmHrDevAlertV2Event?

This SNMP notification trap is generated whenever a device alert changes status to 'active' or optionally to 'notInService' in the device alert table. The trap includes the alert's row status, severity level, training level, alert code, and description to give a complete picture of the alert event. Network operators receive this notification to immediately know about important device conditions that require attention.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' XEROX-COMMON-MIB::xcmHrDevAlertV2Event
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.253.8.53.17.1.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:61796->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (164656484) 19 days, 1:22:44.84
  SNMPv2-MIB::snmpTrapOID.0 = OID: XEROX-COMMON-MIB::xcmHrDevAlertV2Event

Start monitoring Xerox printers and multifunction devices, XCMI foundational module (shared 64-bit counter/gauge type definitions, no device-specific data) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEROX-COMMON-MIB::xcmHrDevAlertV2Event OID value, configure state conditions and alerts, and monitor any Xerox printers and multifunction devices, XCMI foundational module (shared 64-bit counter/gauge type definitions, no device-specific data) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.253	xerox	XEROX-COMMON-MIB
1.3.6.1.4.1.253.8	xeroxCommonMIB	XEROX-COMMON-MIB
1.3.6.1.4.1.253.8.53	xcmHrMIB	XEROX-COMMON-MIB
1.3.6.1.4.1.253.8.53.17	xcmHrDevAlert	XEROX-COMMON-MIB
1.3.6.1.4.1.253.8.53.17.1	xcmHrDevAlertV1EventOID	XEROX-COMMON-MIB
1.3.6.1.4.1.253.8.53.17.1.0	xcmHrDevAlertV2EventPrefix	XEROX-COMMON-MIB
1.3.6.1.4.1.253.8.53.17.1.0.1	xcmHrDevAlertV2Event	XEROX-COMMON-MIB

XEROX-COMMON-MIB :: xcmHrDevAlertV2Event

xcmHrDevAlertV2Event

Also defined in

Module

This MIB depends on