This object manages the row status of this conceptual row in the 'xcmGenFixedLocalizationTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmGenFixedLocalizationRowStat' row status object; and SHALL clear the 'xcmGenFixedLocalizationGroup' bit in 'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmGenFixedLocalizationRowStat' row status object; and SHALL set the 'xcmGenFixedLocalizationGroup' bit in 'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'. Usage: Conforming implementations NEED NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: Conforming implementations MAY support a single, static conceptual row, but SHALL allocate that row with an 'hrDeviceIndex' value of one ('1'). Usage: This row status SHALL be set, to 'active(1)' (for static rows) or 'createAndGo(4)' (for dynamic rows), in the same PDU which sets the fixed locale in 'xcmGenFixedLocalizationIndex' (thus activating/allocating this conceptual row). Usage: To explicitly release this conceptual row, a management station SHALL set 'xcmGenFixedLocalizationRowStat' to 'notInService(2)' (for static rows) or 'destroy(6)' (for dynamic rows). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object.