All MIBs › XEROX-COMMON-MIB › xcmCommsTrafficOutputUnit
xcmCommsTrafficOutputUnit
Module: XEROX-COMMON-MIB
OID (symbolic): XEROX-COMMON-MIB::xcmCommsTrafficOutputUnit
OID (numeric): 1.3.6.1.4.1.253.8.61.12.2.1.3
Node type: OBJECT-TYPE
Type: XcmHrDevTrafficUnit
Access: read-only
Description:
A layer output unit, used by system administrators and end users of this layer for traffic counters.
What is xcmCommsTrafficOutputUnit?
This read-only object specifies the measurement unit (bits/sec, packets/sec, bytes/sec, etc.) used by system administrators and end users when interpreting traffic counter values on a Xerox communications layer device. It ensures that traffic statistics are understood in the correct scale. Operators refer to this to properly interpret the numeric output traffic counter values reported by the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.253.8.61.12.2.1.3 snmpwalk -v2c -c public <target> XEROX-COMMON-MIB::xcmCommsTrafficOutputUnit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.253.8.61.12.2.1.3.1 snmpget -v2c -c public <target> XEROX-COMMON-MIB::xcmCommsTrafficOutputUnit.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.253 | xerox | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8 | xeroxCommonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.61 | xcmCommsEngineMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.61.12 | xcmCommsTraffic | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.61.12.2 | xcmCommsTrafficTable | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.61.12.2.1 | xcmCommsTrafficEntry | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.61.12.2.1.3 | xcmCommsTrafficOutputUnit | XEROX-COMMON-MIB |