All MIBs › XEROX-COMMON-MIB
Organization: Xerox Corporation - Xerox Common Management Interface Working Group
Last Updated: 2002-09-17
Category: Xerox Printer Management
Description: Provides Xerox XCMI common base objects and OID tree for all Xerox printer management MIB modules.
3,350 OIDs total — showing 2,973-3,350 (page 2 of 2)
« Prev Page 2 of 2
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| xcmCONetbiosIntDistServer | 1.3.6.1.4.1.253.8.63.25.1522 | |||
| xcmCONetbiosIntDistServerAddress | 1.3.6.1.4.1.253.8.63.25.1522.1 | |||
| xcmCONetbiosIntDistServerSource | 1.3.6.1.4.1.253.8.63.25.1522.2 | |||
| xcmCONetbiosSAP | 1.3.6.1.4.1.253.8.63.25.1591 | |||
| xcmCONetbiosSAPInterval | 1.3.6.1.4.1.253.8.63.25.1591.1 | |||
| xcmCONetbiosApplications | 1.3.6.1.4.1.253.8.63.25.1700 | |||
| xcmCONetbiosSMB | 1.3.6.1.4.1.253.8.63.25.1701 | |||
| xcmCONetbiosSMBPClient | 1.3.6.1.4.1.253.8.63.25.1702 | |||
| xcmCONetbiosSMBPClientMaxConns | 1.3.6.1.4.1.253.8.63.25.1702.4 | |||
| xcmCONetbiosSMBPClientSpool | 1.3.6.1.4.1.253.8.63.25.1702.31 | |||
| xcmCONetbiosSMBPClientMaxSpool | 1.3.6.1.4.1.253.8.63.25.1702.32 | |||
| xcmCONetbiosSMBPClientJobTimeout | 1.3.6.1.4.1.253.8.63.25.1702.40 | |||
| xcmCONetbiosSMBPClientAutoSwitch | 1.3.6.1.4.1.253.8.63.25.1702.41 | |||
| xcmCONetbiosSMBPClientBinaryPS | 1.3.6.1.4.1.253.8.63.25.1702.42 | |||
| xcmCONetbiosSMBPClientDefaultPDL | 1.3.6.1.4.1.253.8.63.25.1702.43 | |||
| xcmCONetbiosSMBPServer | 1.3.6.1.4.1.253.8.63.25.1703 | |||
| xcmCONetbiosSMBPServerMaxConns | 1.3.6.1.4.1.253.8.63.25.1703.4 | |||
| xcmCONetbiosSMBPServerSpool | 1.3.6.1.4.1.253.8.63.25.1703.31 | |||
| xcmCONetbiosSMBPServerMaxSpool | 1.3.6.1.4.1.253.8.63.25.1703.32 | |||
| xcmCONetbiosSMBPServerJobTimeout | 1.3.6.1.4.1.253.8.63.25.1703.40 | |||
| xcmCONetbiosSMBPServerAutoSwitch | 1.3.6.1.4.1.253.8.63.25.1703.41 | |||
| xcmCONetbiosSMBPServerBinaryPS | 1.3.6.1.4.1.253.8.63.25.1703.42 | |||
| xcmCONetbiosSMBPServerDefaultPDL | 1.3.6.1.4.1.253.8.63.25.1703.43 | |||
| xcmCONetbiosSMBFClient | 1.3.6.1.4.1.253.8.63.25.1704 | |||
| xcmCONetbiosSMBFServer | 1.3.6.1.4.1.253.8.63.25.1705 | |||
| xcmCONetbiosSMBFServerName | 1.3.6.1.4.1.253.8.63.25.1705.1 | |||
| xcmCONetbiosSMBDomain | 1.3.6.1.4.1.253.8.63.25.1706 | |||
| xcmCONetbeuiSuite | 1.3.6.1.4.1.253.8.63.26 | |||
| xcmCONetbeuiDatalinks | 1.3.6.1.4.1.253.8.63.26.1200 | |||
| xcmCONetbeuiLLC | 1.3.6.1.4.1.253.8.63.26.1201 | |||
| xcmCONetbeuiDLC | 1.3.6.1.4.1.253.8.63.26.1202 | |||
| xcmCOSerialSuite | 1.3.6.1.4.1.253.8.63.27 | |||
| xcmCOSerialPhysical | 1.3.6.1.4.1.253.8.63.27.1100 | |||
| xcmCOSerialSignalType | 1.3.6.1.4.1.253.8.63.27.1101 | |||
| xcmCOSerialSignalOverride | 1.3.6.1.4.1.253.8.63.27.1101.1 | |||
| xcmCOSerialSignalDetected | 1.3.6.1.4.1.253.8.63.27.1101.2 | |||
| xcmCOSerialSignalAdaptive | 1.3.6.1.4.1.253.8.63.27.1101.3 | |||
| xcmCOSerialSignalSupport | 1.3.6.1.4.1.253.8.63.27.1101.4 | |||
| xcmCOSerialDevice | 1.3.6.1.4.1.253.8.63.27.1102 | |||
| xcmCOSerialDeviceName | 1.3.6.1.4.1.253.8.63.27.1102.1 | |||
| xcmCOSerialSpeed | 1.3.6.1.4.1.253.8.63.27.1103 | |||
| xcmCOSerialSpeedOverride | 1.3.6.1.4.1.253.8.63.27.1103.1 | |||
| xcmCOSerialSpeedDetected | 1.3.6.1.4.1.253.8.63.27.1103.2 | |||
| xcmCOSerialSpeedAdaptive | 1.3.6.1.4.1.253.8.63.27.1103.3 | |||
| xcmCOSerialSpeedSupport | 1.3.6.1.4.1.253.8.63.27.1103.4 | |||
| xcmCOSerialMinSpeed | 1.3.6.1.4.1.253.8.63.27.1103.5 | |||
| xcmCOSerialMaxSpeed | 1.3.6.1.4.1.253.8.63.27.1103.6 | |||
| xcmCOSerialBidirectional | 1.3.6.1.4.1.253.8.63.27.1104 | |||
| xcmCOSerialInputTimeout | 1.3.6.1.4.1.253.8.63.27.1105 | |||
| xcmCOSerialOutputTimeout | 1.3.6.1.4.1.253.8.63.27.1106 | |||
| xcmCOSerialConnectorType | 1.3.6.1.4.1.253.8.63.27.1107 | |||
| xcmCOSerialConnectorOverride | 1.3.6.1.4.1.253.8.63.27.1107.1 | |||
| xcmCOSerialConnectorDetected | 1.3.6.1.4.1.253.8.63.27.1107.2 | |||
| xcmCOSerialConnectorAdaptive | 1.3.6.1.4.1.253.8.63.27.1107.3 | |||
| xcmCOSerialMinInputChars | 1.3.6.1.4.1.253.8.63.27.1108 | |||
| xcmCOSerialMaxInputChars | 1.3.6.1.4.1.253.8.63.27.1109 | |||
| xcmCOSerialParity | 1.3.6.1.4.1.253.8.63.27.1111 | |||
| xcmCOSerialDataBits | 1.3.6.1.4.1.253.8.63.27.1112 | |||
| xcmCOSerialFlowControl | 1.3.6.1.4.1.253.8.63.27.1113 | |||
| xcmCOSerialStartBits | 1.3.6.1.4.1.253.8.63.27.1114 | |||
| xcmCOSerialStopBits | 1.3.6.1.4.1.253.8.63.27.1115 | |||
| xcmCOSerialInputPrime | 1.3.6.1.4.1.253.8.63.27.1116 | |||
| xcmCOSerialDTR | 1.3.6.1.4.1.253.8.63.27.1121 | |||
| xcmCOSerialDSR | 1.3.6.1.4.1.253.8.63.27.1122 | |||
| xcmCOSerialCTS | 1.3.6.1.4.1.253.8.63.27.1123 | |||
| xcmCOSerialRTS | 1.3.6.1.4.1.253.8.63.27.1124 | |||
| xcmCOSerialDatalinks | 1.3.6.1.4.1.253.8.63.27.1200 | |||
| xcmCOSerialProtocol | 1.3.6.1.4.1.253.8.63.27.1200.1 | |||
| xcmCOParallelSuite | 1.3.6.1.4.1.253.8.63.28 | |||
| xcmCOParallelPhysical | 1.3.6.1.4.1.253.8.63.28.1100 | |||
| xcmCOParallelSignalType | 1.3.6.1.4.1.253.8.63.28.1101 | |||
| xcmCOParallelSignalOverride | 1.3.6.1.4.1.253.8.63.28.1101.1 | |||
| xcmCOParallelSignalDetected | 1.3.6.1.4.1.253.8.63.28.1101.2 | |||
| xcmCOParallelSignalAdaptive | 1.3.6.1.4.1.253.8.63.28.1101.3 | |||
| xcmCOParallelSignalSupport | 1.3.6.1.4.1.253.8.63.28.1101.4 | |||
| xcmCOParallelDevice | 1.3.6.1.4.1.253.8.63.28.1102 | |||
| xcmCOParallelDeviceName | 1.3.6.1.4.1.253.8.63.28.1102.1 | |||
| xcmCOParallelDeviceID | 1.3.6.1.4.1.253.8.63.28.1102.2 | |||
| xcmCOParallelSpeed | 1.3.6.1.4.1.253.8.63.28.1103 | |||
| xcmCOParallelSpeedOverride | 1.3.6.1.4.1.253.8.63.28.1103.1 | |||
| xcmCOParallelSpeedDetected | 1.3.6.1.4.1.253.8.63.28.1103.2 | |||
| xcmCOParallelSpeedAdaptive | 1.3.6.1.4.1.253.8.63.28.1103.3 | |||
| xcmCOParallelSpeedSupport | 1.3.6.1.4.1.253.8.63.28.1103.4 | |||
| xcmCOParallelMinSpeed | 1.3.6.1.4.1.253.8.63.28.1103.5 | |||
| xcmCOParallelMaxSpeed | 1.3.6.1.4.1.253.8.63.28.1103.6 | |||
| xcmCOParallelBidirectional | 1.3.6.1.4.1.253.8.63.28.1104 | |||
| xcmCOParallelInputTimeout | 1.3.6.1.4.1.253.8.63.28.1105 | |||
| xcmCOParallelOutputTimeout | 1.3.6.1.4.1.253.8.63.28.1106 | |||
| xcmCOParallelConnectorType | 1.3.6.1.4.1.253.8.63.28.1107 | |||
| xcmCOParallelConnectorOverride | 1.3.6.1.4.1.253.8.63.28.1107.1 | |||
| xcmCOParallelConnectorDetected | 1.3.6.1.4.1.253.8.63.28.1107.2 | |||
| xcmCOParallelConnectorAdaptive | 1.3.6.1.4.1.253.8.63.28.1107.3 | |||
| xcmCOParallelMinInputChars | 1.3.6.1.4.1.253.8.63.28.1108 | |||
| xcmCOParallelMaxInputChars | 1.3.6.1.4.1.253.8.63.28.1109 | |||
| xcmCOParallelParity | 1.3.6.1.4.1.253.8.63.28.1111 | |||
| xcmCOParallelDataBits | 1.3.6.1.4.1.253.8.63.28.1112 | |||
| xcmCOParallelFlowControl | 1.3.6.1.4.1.253.8.63.28.1113 | |||
| xcmCOParallelInputPrime | 1.3.6.1.4.1.253.8.63.28.1116 | |||
| xcmCOParallelHandshake | 1.3.6.1.4.1.253.8.63.28.1117 | |||
| xcmCOParallelDataStrobe | 1.3.6.1.4.1.253.8.63.28.1118 | |||
| xcmCOParallelDatalinks | 1.3.6.1.4.1.253.8.63.28.1200 | |||
| xcmCOParallelProtocol | 1.3.6.1.4.1.253.8.63.28.1200.1 | |||
| xcmCODirectPrintSuite | 1.3.6.1.4.1.253.8.63.29 | |||
| xcmCODirectPrintPhysical | 1.3.6.1.4.1.253.8.63.29.1100 | |||
| xcmCODirectPrintDatalinks | 1.3.6.1.4.1.253.8.63.29.1200 | |||
| xcmCODirectPrintProtocol | 1.3.6.1.4.1.253.8.63.29.1200.1 | |||
| xcmCOUsbSuite | 1.3.6.1.4.1.253.8.63.30 | |||
| xcmCOUsbPhysical | 1.3.6.1.4.1.253.8.63.30.1100 | |||
| xcmCOUsbDevice | 1.3.6.1.4.1.253.8.63.30.1102 | |||
| xcmCOUsbDeviceName | 1.3.6.1.4.1.253.8.63.30.1102.1 | |||
| xcmCOUsbSpeed | 1.3.6.1.4.1.253.8.63.30.1103 | |||
| xcmCOUsbSpeedOverride | 1.3.6.1.4.1.253.8.63.30.1103.1 | |||
| xcmCOUsbSpeedDetected | 1.3.6.1.4.1.253.8.63.30.1103.2 | |||
| xcmCOUsbSpeedAdaptive | 1.3.6.1.4.1.253.8.63.30.1103.3 | |||
| xcmCOUsbSpeedSupport | 1.3.6.1.4.1.253.8.63.30.1103.4 | |||
| xcmCOUsbMinSpeed | 1.3.6.1.4.1.253.8.63.30.1103.5 | |||
| xcmCOUsbMaxSpeed | 1.3.6.1.4.1.253.8.63.30.1103.6 | |||
| xcmCOUsbBidirectional | 1.3.6.1.4.1.253.8.63.30.1104 | |||
| xcmCOUsbInputTimeout | 1.3.6.1.4.1.253.8.63.30.1105 | |||
| xcmCOUsbOutputTimeout | 1.3.6.1.4.1.253.8.63.30.1106 | |||
| xcmCOUsbMinInputChars | 1.3.6.1.4.1.253.8.63.30.1108 | |||
| xcmCOUsbMaxInputChars | 1.3.6.1.4.1.253.8.63.30.1109 | |||
| xcmCOUsbDatalinks | 1.3.6.1.4.1.253.8.63.30.1200 | |||
| xcmCOUsbProtocol | 1.3.6.1.4.1.253.8.63.30.1200.1 | |||
| xCmCommsConfigDummy | 1.3.6.1.4.1.253.8.63.999 | |||
| ADR xCmSnmpNetbiosAddress | 1.3.6.1.4.1.253.8.63.999.1 | XcmSnmpNetbiosAddress | not-accessible | Dummy - DO NOT USE |
| XCM xCmCommsLDAPAttributeType | 1.3.6.1.4.1.253.8.63.999.5 | XcmCommsLDAPAttributeType | not-accessible | Dummy - DO NOT USE |
| ADR xCmSnmpIPHostnameAddress | 1.3.6.1.4.1.253.8.63.999.6 | XcmSnmpIPHostnameAddress | not-accessible | Dummy - DO NOT USE |
| xcmCommsConfigMIB | 1.3.6.1.4.1.253.8.64 | Version: 5.11.pub The MIB module which supports active configuration discovery of communications protocol stacks, communications end system applications, communications intermediate systems, and communications gateways for network accessible host systems. Usage: Note that throughout this MIB module, the INDEX clauses referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices Group) of the Host Resources MIB (RFC 2790) SHALL specify host system CPUs (ie, 'hrDeviceProcessor') and shall NOT specify host system 'network interfaces', with entries in the 'ifTable' (Interfaces Group) of MIB-II (RFC 1213). Copyright (C) 1996-2002 Xerox Corporation. All Rights Reserved. | ||
| xcmCommsConfigMIBConformance | 1.3.6.1.4.1.253.8.64.2 | |||
| xcmCommsConfigMIBGroups | 1.3.6.1.4.1.253.8.64.2.2 | |||
| xcmCommsConfigGroup | 1.3.6.1.4.1.253.8.64.2.2.3 | The Comms Config Group (Communications Configurations). | ||
| xcmCommsOptionGroup | 1.3.6.1.4.1.253.8.64.2.2.4 | The Comms Option Group (Communications Configuration Options). | ||
| xcmCommsDirRecordGroup | 1.3.6.1.4.1.253.8.64.2.2.5 | Directory Record Group. | ||
| xcmCommsDirAttributeGroup | 1.3.6.1.4.1.253.8.64.2.2.6 | Directory Attribute Group. | ||
| xcmCommsDirStringGroup | 1.3.6.1.4.1.253.8.64.2.2.7 | Directory String Group. | ||
| xcmCommsProtocolGroup | 1.3.6.1.4.1.253.8.64.2.2.8 | Comms Protocol Group (available suites and protocols). | ||
| xcmCommsConfigMIBCompliance | 1.3.6.1.4.1.253.8.64.2.3 | The compliance statements for SNMP management agents that implement the Comms Config MIB. | ||
| xcmCommsConfig | 1.3.6.1.4.1.253.8.64.3 | |||
| xcmCommsConfigTable | 1.3.6.1.4.1.253.8.64.3.2 | not-accessible | A table of the communications engines installed and (possibly) running on platforms (ie, CPUs) on this host system. | |
| xcmCommsConfigEntry | 1.3.6.1.4.1.253.8.64.3.2.1 | not-accessible | An entry for a communications engine installed and (possibly) running on a platform (ie, CPU) on this host system. Usage: Note that values of 'hrDeviceIndex' used to reference entries in the 'xcmCommsEngineTable' SHALL reference entries in the 'hrDeviceTable' with 'hrDeviceType' equal to 'hrDeviceProcessor' (representing host system CPUs and therefore also having corresponding entries in the 'hrProcessorTable'). | |
| ROW xcmCommsConfigRowStatus | 1.3.6.1.4.1.253.8.64.3.2.1.1 | RowStatus | read-only | This object displays the status of individual conceptual rows in the 'xcmCommsConfigTable'. Usage: 'xcmCommsConfigRowStatus' is 'read-only' because these conceptual rows shall NOT be deleted. |
| CAR xcmCommsConfigActiveOptionFirst | 1.3.6.1.4.1.253.8.64.3.2.1.2 | Cardinal32 | read-only | The value of 'xcmCommsOptionIndex' corresponding to the first active configuration option (in 'xcmCommsOptionTable'), or zero if this communications engine does NOT require such information. Usage: This 'chain' represents currently active configuration options of this communications engine. |
| CAR xcmCommsConfigActiveOptionLast | 1.3.6.1.4.1.253.8.64.3.2.1.3 | Cardinal32 | read-only | The value of 'xcmCommsOptionIndex' corresponding to the last active configuration option (in 'xcmCommsOptionTable'), or zero if this communications engine does NOT require such information. Usage: This 'chain' represents currently active configuration options of this communications engine. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsOptionIndex'. This is the value of the numerically highest entry index, NOT necessarily the 'logically last' entry index in the structured tree in 'xcmCommsOptionTable'. |
| XCM xCmCommsConfigGroupSupport | 1.3.6.1.4.1.253.8.64.3.2.1.4 | XcmCommsConfigGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Config MIB object groups supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Comms Config MIB object groups. |
| XCM xcmCommsConfigCreateSupport | 1.3.6.1.4.1.253.8.64.3.2.1.5 | XcmCommsConfigGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Config MIB object groups supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Comms Config MIB object groups. |
| XCM xcmCommsConfigUpdateSupport | 1.3.6.1.4.1.253.8.64.3.2.1.6 | XcmCommsConfigGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Config MIB object groups supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Comms Config MIB object groups. |
| xcmCommsOption | 1.3.6.1.4.1.253.8.64.4 | |||
| xcmCommsOptionTable | 1.3.6.1.4.1.253.8.64.4.2 | not-accessible | A table containing information on installation, configuration, or other aspects of communications options on this host system. | |
| xcmCommsOptionEntry | 1.3.6.1.4.1.253.8.64.4.2.1 | not-accessible | An entry containing information on installation, configuration, or other aspects of communications options on this host system. | |
| ORD xcmCommsOptionIndex | 1.3.6.1.4.1.253.8.64.4.2.1.1 | Ordinal32 | not-accessible | A unique value used by this host system to identify this conceptual row in the 'xcmCommsOptionTable'. |
| ROW xcmCommsOptionRowStatus | 1.3.6.1.4.1.253.8.64.4.2.1.2 | RowStatus | read-only | This object displays the status of individual conceptual rows in the 'xcmCommsOptionTable'. |
| OID xcmCommsOptionTypeOID | 1.3.6.1.4.1.253.8.64.4.2.1.3 | OBJECT IDENTIFIER | read-only | An unambiguous communications option type, used by system administrators and end users to identify this communications option. Usage: Since this communications option type is specified as an object identifier, it MAY be taken from any IETF, Xerox, third- party, or product-specific MIB, or it MAY simply be any IETF SMIv2-style 'autonomous type'. |
| XCM xcmCommsOptionValueSyntax | 1.3.6.1.4.1.253.8.64.4.2.1.4 | XcmGenOptionValueSyntax | read-only | A communications option value syntax, used by system administrators and end users to specify the correct value syntax for this communications option. Usage: This communications option value syntax is used to select which of the following three objects shall be used to contain the value of this communications option. |
| I32 xcmCommsOptionValueInteger | 1.3.6.1.4.1.253.8.64.4.2.1.5 | Integer32 | read-only | A communications option value integer, used by system administrators and end users to specify the current value for a communications option with a base value syntax of 'INTEGER'. |
| OID xcmCommsOptionValueOID | 1.3.6.1.4.1.253.8.64.4.2.1.6 | OBJECT IDENTIFIER | read-only | A communications option value OID (object identifier), used by system administrators and end users to specify the current value for a communications option with a base value syntax of 'OBJECT IDENTIFIER'. |
| OCT xcmCommsOptionValueString | 1.3.6.1.4.1.253.8.64.4.2.1.7 | OCTET STRING | read-only | A communications option value string, used by system administrators and end users to specify the current value for a communications option with a base value syntax of 'OCTET STRING'. Usage: This object is of type 'XcmFixedLocaleDisplayString' (if 'xcmCommsOptionValueLocalization' is zero) or 'XcmNamedLocaleUtf8String' (if 'xcmCommsOptionValueLocalization' is non-zero). Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| CAR xcmCommsOptionValueLocalization | 1.3.6.1.4.1.253.8.64.4.2.1.8 | Cardinal32 | read-only | A communications option value localization, used by system administrators and end users to specify the ALTERNATE localization for a communications option (different from 'xcmGenFixedLocalizationIndex'), so that 'xcmCommsOptionValueString' becomes 'XcmNamedLocaleUtf8String'. Usage: For a communications option string to which POSIX-style localization (territory, language, character set) is applicable (non-keyword) this object MAY contain a suitable index value for 'xcmGenLocalizationIndex' from the XCMI General MIB, or zero to indicate 'none'. |
| IAN xcmCommsOptionValueCodedCharSet | 1.3.6.1.4.1.253.8.64.4.2.1.9 | IANACharset | read-only | A communications option value character set, used by system administrators and end users to specify the ALTERNATE character set for a communications option (different from 'xcmGenFixedLocalizationIndex'), so that 'xcmCommsOptionValueString' is unambiguous. Usage: XCMI conforming management agents shall ONLY allow Sets of this object to 'other' (none) or 'utf-8' (Unicode/ ISO-10646 in the UTF-8 encoding, a proper superset of US-ASCII), for consistency with the Xerox Unicode Coherence Standard. |
| CAR xcmCommsOptionNextIndex | 1.3.6.1.4.1.253.8.64.4.2.1.10 | Cardinal32 | read-only | The value of 'xcmCommsOptionIndex' corresponding to the next 'chained' conceptual row in the 'xcmCommsOptionTable', or zero if this is the last associated conceptual row in a particular vertical 'chain' within a given set. Usage: Generally, communications options (of similar or unlike type) are 'chained' vertically via '...[Next|Previous]Index'. But, in the case where particular communications options MUST be 'tightly coupled', they SHOULD be 'shelved' horizontally via '...[Family|Previous]Index' (eg, an IP address and an IP subnet mask). |
| CAR xcmCommsOptionPreviousIndex | 1.3.6.1.4.1.253.8.64.4.2.1.11 | Cardinal32 | read-only | The value of 'xcmCommsOptionIndex' corresponding to a previous associated conceptual row in the 'xcmCommsOptionTable', or zero if this is the first associated conceptual row in a given set. Usage: This object provides common 'backward' linkage for BOTH the 'xcmCommsOptionNextIndex' and 'xcmCommsOptionFamilyIndex' linkage objects. A previous conceptual row MAY 'forward' reference this conceptual row via either '...NextIndex' or '...FamilyIndex' - ie, a given conceptual row MAY 'forward' reference EXACTLY zero, one, or two 'later' conceptual rows. |
| CAR xcmCommsOptionFamilyIndex | 1.3.6.1.4.1.253.8.64.4.2.1.12 | Cardinal32 | read-only | The value of 'xcmCommsOptionIndex' corresponding to the next 'family' conceptual row in the 'xcmCommsOptionTable', or zero if this is the last associated conceptual row in a particular horizontal 'shelf' (of 'family' members) within a given set. Usage: Generally, communications options (of similar or unlike type) are 'chained' vertically via '...[Next|Previous]Index'. But, in the case where particular communications options MUST be 'tightly coupled', they SHOULD be 'shelved' horizontally via '...[Family|Previous]Index' (eg, an IP address and an IP subnet mask). |
| xcmCommsDirRecord | 1.3.6.1.4.1.253.8.64.5 | |||
| xcmCommsDirRecordTable | 1.3.6.1.4.1.253.8.64.5.2 | not-accessible | A table containing directory records configured on this host system. | |
| xcmCommsDirRecordEntry | 1.3.6.1.4.1.253.8.64.5.2.1 | not-accessible | An entry for a directory record configured on this host system. | |
| XCM xCmCommsDirRecordType | 1.3.6.1.4.1.253.8.64.5.2.1.1 | XcmCommsDirRecordType | not-accessible | A directory record type, used to uniquely identify this directory record (and all subordinate directory attributes), when combined with 'xcmCommsDirRecordIndex' (below). |
| ORD xcmCommsDirRecordIndex | 1.3.6.1.4.1.253.8.64.5.2.1.2 | Ordinal32 | not-accessible | A directory record index, used to uniquely identify this directory record (and all subordinate directory attributes), when combined with 'xcmCommsDirRecordType' (above). Usage: This directory record index SHALL be unique for each record of a given type (value of 'xcmCommsDirRecordType'), but NEED NOT be unique for directory records of different types. This is to permit directory records of different types to start their numbering (value of 'xcmCommsDirRecordIndex') over from one ('1') and such usage is RECOMMENDED. |
| ROW xcmCommsDirRecordRowStatus | 1.3.6.1.4.1.253.8.64.5.2.1.3 | RowStatus | read-create | This object manages the row status of this conceptual row in the 'xcmCommsDirRecordTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmCommsDirRecordRowStatus' row status object; and SHALL clear the 'commsDirRecordGroup' bit in 'xcmCommsConfigCreateSupport' in the 'xcmCommsConfigTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmCommsDirRecordRowStatus' row status object; and SHALL set the 'commsDirRecordGroup' bit in 'xcmCommsConfigCreateSupport' in the 'xcmCommsConfigTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object. |
| XCM xcmCommsDirRecordKeyType | 1.3.6.1.4.1.253.8.64.5.2.1.4 | XcmCommsDirAttributeType | read-create | A directory record key attribute type, used to specify a primary key attribute for sorting this directory record, or 'unknown' if no primary key attribute is specified. Usage: The 'Relative Distinguished Name' (RDN) of this directory record is the tuple of the directory record type, the key attribute type, and the key attribute value. |
| I32 xcmCommsDirRecordKeyInteger | 1.3.6.1.4.1.253.8.64.5.2.1.5 | Integer32 | read-create | A directory record key attribute integer value, used to specify a primary key attribute for sorting this directory record, or zero ('0') if no primary key attribute is specified. Usage: The 'Relative Distinguished Name' (RDN) of this directory record is the tuple of the directory record type, the key attribute type, and the key attribute value. |
| STR xcmCommsDirRecordKeyString | 1.3.6.1.4.1.253.8.64.5.2.1.6 | XcmFixedLocaleUtf8String | read-create | A directory record key attribute string value, used to specify a primary key attribute for sorting this directory record, or zero ('0') if no primary key attribute is specified. Usage: String-valued directory attributes SHALL be specified as UTF-8 encoded Unicode (ISO 10646) strings. Usage: The 'Relative Distinguished Name' (RDN) of this directory record is the tuple of the directory record type, the key attribute type, and the key attribute value. |
| XCM xcmCommsDirRecordParentType | 1.3.6.1.4.1.253.8.64.5.2.1.7 | XcmCommsDirRecordType | read-create | A parent directory record type, used to identify the parent directory record (superior to this directory record), or 'unknown' if no parent directory record is specified. Usage: Supports hierarchical directory structures. Usage: The 'Fully Qualified Distinguished Name' (FQDN) of this directory record is the concatentation of the RDN (record key) of this directory record with the RDNs of all superior directory records to the 'top' (highest node). |
| CAR xcmCommsDirRecordParentIndex | 1.3.6.1.4.1.253.8.64.5.2.1.8 | Cardinal32 | read-create | A parent directory record index, used to identify the parent directory record (superior to this directory record), or zero ('0') if no parent directory record is specified. Usage: Supports hierarchical directory structures. Usage: The 'Fully Qualified Distinguished Name' (FQDN) of this directory record is the concatentation of the RDN (record key) of this directory record with the RDNs of all superior directory records to the 'top' (highest node). |
| xcmCommsDirAttribute | 1.3.6.1.4.1.253.8.64.6 | |||
| xcmCommsDirAttributeTable | 1.3.6.1.4.1.253.8.64.6.2 | not-accessible | A table containing integer-valued directory attributes configured on this host system. Usage: Table contains an entry for all integer-valued and string-valued attributes configured on this host system. | |
| xcmCommsDirAttributeEntry | 1.3.6.1.4.1.253.8.64.6.2.1 | not-accessible | An entry for an integer-valued directory attribute configured on this host system. | |
| XCM xCmCommsDirAttributeType | 1.3.6.1.4.1.253.8.64.6.2.1.1 | XcmCommsDirAttributeType | not-accessible | A directory attribute type, used to uniquely identify this integer-valued directory attribute (and also any matching string-valued directory attribute in 'xcmCommsDirStringTable'), when combined with 'xcmCommsDirAttributeIndex' (below). Usage: When directory attribute type indicates integer-valued, the value of 'xcmCommsDirAttributeValue' SHALL be the actual value of this directory attribute. Usage: When directory attribute type indicates string-valued, the value of 'xcmCommsDirAttributeValue' SHALL be zero, EXCEPT for a directory attribute type of 'protocolTyped...', when the protocol type shall be specified as the integer value. The actual string-valued attribute SHALL be specified in an exactly matching row of 'xcmCommsDirStringTable'. Usage: Matching directory attributes (string-valued) SHALL be specified in an exactly matching row of 'xcmCommsDirStringTable'. Matching rows have EXACTLY the SAME values of 'xcmCommsDirRecordType', 'xcmCommsDirRecordIndex', 'xcmCommsDirAttributeType', and 'xcmCommsDirAttributeIndex'. Usage: Parallel directory attributes (peers of this one) SHALL be specified in parallel (NOT matching) rows of 'xcmCommsDirAttributeTable' (integer-valued attributes) or 'xcmCommsDirStringTable' (string-valued attributes). Parallel rows have EXACTLY the SAME values of 'xcmCommsDirRecordType', 'xcmCommsDirRecordIndex', and 'xcmCommsDirAttributeIndex', but MUST have a DIFFERENT value of 'xcmCommsDirAttributeType'. Usage: When directory attribute type is 'protocolTyped...' the particular protocol layer SHALL be specified by placing a a value from the enumeration 'XcmCommsStackExtProtocol' in 'xcmCommsDirAttributeValue' for this row. |
| ORD xcmCommsDirAttributeIndex | 1.3.6.1.4.1.253.8.64.6.2.1.2 | Ordinal32 | not-accessible | A directory attribute index, used to uniquely identify this integer-valued directory attribute (and also any matching string-valued directory attribute in 'xcmCommsDirStringTable'), when combined with 'xcmCommsDirAttributeType' (above). Usage: This directory attribute index SHALL be unique for each attribute subordinate to one directory record (ie, rows with EXACTLY the SAME values of 'xcmCommsDirRecordType' and 'xcmCommsDirRecordIndex'). EXCEPT when two or more different directory attributes are 'parallel'; then they SHALL have EXACTLY the SAME value of 'xcmCommsDirAttributeIndex'. Example: The following example illustrates the use of 'parallel' directory attributes in a 'speed dial' entry. (Index values are shown in square brackets, for clarity.) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] xcmCommsDirRecordRowStatus = active xcmCommsDirRecordKeyType = userFullName (sort key) xcmCommsDirRecordKeyInteger = 0 (unused) xcmCommsDirRecordKeyString = 'Fred Flintstone' (sort key) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = userLocation] [xcmCommsDirAttributeIndex = 1] xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = 0 (unused) xcmCommsDirStringRowStatus = active xcmCommsDirStringValue = 'Bldg 705, H-18' [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolTypedAddress] [xcmCommsDirAttributeIndex = 2] xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = osiwanFax (FAX protocol type) xcmCommsDirStringRowStatus = active xcmCommsDirStringValue = '0+...' (FAX phone number) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolPriority] [xcmCommsDirAttributeIndex = 2] (parallel attribute) xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = 100 (highest priority) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolMaxRetries] [xcmCommsDirAttributeIndex = 2] (parallel attribute) xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = 3 (FAX max retries) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolRetryInterval] [xcmCommsDirAttributeIndex = 2] (parallel attribute) xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = 10 (FAX retry interval) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolTypedAddress] [xcmCommsDirAttributeIndex = 3] xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = osiwanFax (FAX protocol type) xcmCommsDirStringRowStatus = active xcmCommsDirStringValue = '0+...' (FAX phone number) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolPriority] [xcmCommsDirAttributeIndex = 3] (parallel attribute) xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = 50 (medium priority) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolTypedAddress] [xcmCommsDirAttributeIndex = 4] xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = internetSMTP (Email protocol) xcmCommsDirStringRowStatus = active xcmCommsDirStringValue = 'fflint@...' (Email address) [xcmCommsDirRecordType = recordSpeedDial] [xcmCommsDirRecordIndex = 1] [xcmCommsDirAttributeType = protocolPriority] [xcmCommsDirAttributeIndex = 4] (parallel attribute) xcmCommsDirAttributeRowStatus = active xcmCommsDirAttributeValue = 1 (lowest priority) Discussion: This example shows a 'speed dial' directory record with a primary sort key (e.g., for local UI display ordering) of the destination user's full name ('userFullName'). Also shown are four sets of 'parallel' directory attributes: a) user location; b) primary FAX destination (highest priority); c) secondary FAX destination (medium priority); d) tertiary Email destination (lowest priority). Usage: Each 'parallel' directory attribute in a given set is correlated by the SAME value of 'xcmCommsDirAttributeIndex'. |
| ROW xcmCommsDirAttributeRowStatus | 1.3.6.1.4.1.253.8.64.6.2.1.3 | RowStatus | read-create | This object manages the row status of this conceptual row in the 'xcmCommsDirAttributeTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmCommsDirAttributeRowStatus' row status object; and SHALL clear the 'commsDirAttributeGroup' bit in 'xcmCommsConfigCreateSupport' in the 'xcmCommsConfigTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmCommsDirAttributeRowStatus' row status object; and SHALL set the 'commsDirAttributeGroup' bit in 'xcmCommsConfigCreateSupport' in the 'xcmCommsConfigTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object. |
| I32 xcmCommsDirAttributeValue | 1.3.6.1.4.1.253.8.64.6.2.1.4 | Integer32 | read-create | A directory attribute value, the contents of this integer-valued directory attribute, or zero if 'xcmCommsDirAttributeType' indicates string-valued, and is NOT 'protocolTyped...'. Usage: When directory attribute type is 'protocolTyped...' the particular protocol layer SHALL be specified by placing a a value from the enumeration 'XcmCommsStackExtProtocol' in 'xcmCommsDirAttributeValue' for this row. |
| xcmCommsDirString | 1.3.6.1.4.1.253.8.64.7 | |||
| xcmCommsDirStringTable | 1.3.6.1.4.1.253.8.64.7.2 | not-accessible | A table containing string-valued directory attributes configured on this host system. Usage: Table contains an entry for ONLY string-valued and configured on this host system. | |
| xcmCommsDirStringEntry | 1.3.6.1.4.1.253.8.64.7.2.1 | not-accessible | An entry containing string-valued directory attributes configured on this host system. | |
| ROW xcmCommsDirStringRowStatus | 1.3.6.1.4.1.253.8.64.7.2.1.1 | RowStatus | read-create | This object manages the row status of this conceptual row in the 'xcmCommsDirStringTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmCommsDirStringRowStatus' row status object; and SHALL clear the 'commsDirStringGroup' bit in 'xcmCommsConfigCreateSupport' in the 'xcmCommsConfigTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmCommsDirStringRowStatus' row status object; and SHALL set the 'commsDirStringGroup' bit in 'xcmCommsConfigCreateSupport' in the 'xcmCommsConfigTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object. |
| STR xcmCommsDirStringValue | 1.3.6.1.4.1.253.8.64.7.2.1.2 | XcmFixedLocaleUtf8String | read-create | A directory attribute value, the contents of this string-valued directory attribute. Usage: String-valued directory attributes SHALL be specified as UTF-8 encoded Unicode (ISO 10646) strings. Usage: When directory attribute type is 'protocolTyped...' the particular protocol layer SHALL be specified by placing a a value from the enumeration 'XcmCommsStackExtProtocol' in 'xcmCommsDirAttributeValue' for this row. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| xcmCommsProtocol | 1.3.6.1.4.1.253.8.64.8 | |||
| xcmCommsProtocolTable | 1.3.6.1.4.1.253.8.64.8.2 | not-accessible | A table of available communications protocol suites and specific communications protocols on this host system. | |
| xcmCommsProtocolEntry | 1.3.6.1.4.1.253.8.64.8.2.1 | not-accessible | An entry for an available communications protocol suite or specific communications protocol on this host system. | |
| XCM xcmCommsProtocolType | 1.3.6.1.4.1.253.8.64.8.2.1.1 | XcmCommsStackExtProtocol | not-accessible | The type of an available communications protocol suite or specific communications protocol on this host system. Usage: To indicate that a communications protocol suite is available, use a suite value of 'XcmCommsStackExtProtocol', eg, 'internetSuite(140101)' for the Internet suite. Usage: To indicate that a specific communications protocol is available, use a specific value of 'XcmCommsStackExtProtocol', eg, 'internetFTP(141504)' for the Internet FTP protocol. |
| ROW xcmCommsProtocolRowStatus | 1.3.6.1.4.1.253.8.64.8.2.1.2 | RowStatus | read-only | This object displays the status of individual conceptual rows in the 'xcmCommsProtocolTable'. |
| xcmSvcMonTC | 1.3.6.1.4.1.253.8.73 | Version: 6.007.pub Textual Conventions companion to XCMI Service Monitoring MIB, the MIB module for basic configuration and active management of application services for network accessible host systems. See: IETF Network Services Monitoring MIB (IETF RFC 1565, January 1994). See: IETF Host Resources MIB (IETF RFC 2790, March 2000). See: OSI Reference Model - Part 1: Basic Reference Model (CCITT X.200:1992 | ISO 7498-1:1992). See: OSI Reference Model - Part 4: Systems Management (CCITT X.700:1992 | ISO 7498-4:1992). See: Document Printing Application - Part 1: Abstract Service (ISO/IEC 10175-1 Final Text, March 1996). See: POSIX System Administration - Part 4: Print Interfaces (IEEE 1387.4 / Draft 8, October 1994). Copyright (C) 1996-2005 Xerox Corporation. All Rights Reserved. | ||
| xCmSvcMonDummy | 1.3.6.1.4.1.253.8.73.999 | |||
| XCM xCmSvcMonGroupSupport | 1.3.6.1.4.1.253.8.73.999.1 | XcmSvcMonGroupSupport | not-accessible | Dummy - DO NOT USE |
| XCM xCmSvcMonJobConfirmSupport | 1.3.6.1.4.1.253.8.73.999.7 | XcmSvcMonJobConfirmSupport | not-accessible | Dummy - DO NOT USE |
| XCM xCmSvcMonSystemMailSenderNetAuthSupport | 1.3.6.1.4.1.253.8.73.999.8 | XcmSvcMonSystemMailSenderNetAuthSupport | not-accessible | Dummy - DO NOT USE |
| XCM xCmSvcMonAttachmentPDLSupport | 1.3.6.1.4.1.253.8.73.999.9 | XcmSvcMonAttachmentPDLSupport | not-accessible | Dummy - DO NOT USE |
| XCM xCmImageQualityType | 1.3.6.1.4.1.253.8.73.999.10 | XcmImageQualityType | not-accessible | Dummy - DO NOT USE |
| XCM xCmOutputUsage | 1.3.6.1.4.1.253.8.73.999.11 | XcmOutputUsage | not-accessible | Dummy - DO NOT USE |
| XCM xCMLoginCredentialsSource | 1.3.6.1.4.1.253.8.73.999.12 | XcmLoginCredentialsSource | not-accessible | Dummy - DO NOT USE |
| xcmSvcMonMIB | 1.3.6.1.4.1.253.8.74 | Version: 5.502.pub The MIB module for basic configuration and active management of application services for network accessible host systems. See: IETF Network Services Monitoring MIB (IETF RFC 1565, January 1994). See: IETF Host Resources MIB (IETF RFC 2790, March 2000). See: OSI Reference Model - Part 1: Basic Reference Model (CCITT X.200:1992 | ISO 7498-1:1992). See: OSI Reference Model - Part 4: Systems Management (CCITT X.700:1992 | ISO 7498-4:1992). Copyright (C) 1996-2006 Xerox Corporation. All Rights Reserved. | ||
| xcmSvcMonGeneral | 1.3.6.1.4.1.253.8.74.1 | |||
| xcmSvcMonGeneralTable | 1.3.6.1.4.1.253.8.74.1.2 | not-accessible | A table of general counters and capabilities for ease of use of the XCMI Service Monitoring MIB on this host system. Usage: The ONLY valid row in the 'xcmSvcMonGeneralTable' SHALL have an 'xcmSvcMonGeneralIndex' of one ('1'). | |
| xcmSvcMonGeneralEntry | 1.3.6.1.4.1.253.8.74.1.2.1 | not-accessible | An entry of general counters and capabilities for ease of use of the XCMI Service Monitoring MIB on this host system. Usage: The ONLY valid row in the 'xcmSvcMonGeneralTable' SHALL have an 'xcmSvcMonGeneralIndex' of one ('1'). | |
| ORD xcmSvcMonGeneralIndex | 1.3.6.1.4.1.253.8.74.1.2.1.1 | Ordinal32 | not-accessible | A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonGeneralTable'. Usage: The ONLY valid row in the 'xcmSvcMonGeneralTable' SHALL have an 'xcmSvcMonGeneralIndex' of one ('1'). Usage: 'xcmSvcMonGeneralRowStatus' is 'read-only' because the ONLY valid conceptual row SHALL NOT be deleted. |
| ROW xcmSvcMonGeneralRowStatus | 1.3.6.1.4.1.253.8.74.1.2.1.2 | RowStatus | read-only | This object is used to display status of the ONLY valid conceptual row in the 'xcmSvcMonGeneralTable'. Usage: 'xcmSvcMonGeneralRowStatus' is 'read-only' because the ONLY valid conceptual row SHALL NOT be deleted. |
| PRO xcmSvcMonGeneralVersionID | 1.3.6.1.4.1.253.8.74.1.2.1.3 | ProductID | read-only | The software product ID of the SNMP sub-agent which implements the XCMI Service Monitoring MIB on this host system. Usage: This object SHALL specify the software product ID of an SNMP sub-agent (possibly also found in a conceptual row in the 'hrSWRunTable' and/or 'hrSWInstalledTable' in the IETF HR MIB). This object SHALL NOT specify a particular release of the XCMI Service Monitoring MIB, or the whole host system product. Note: Contrast with 'sysObjectID' for the whole SNMP agent in the IETF MIB-II (RFC 1213) and 'hrDeviceID' for the whole device (or whole product, in the case of 'xcmHrDevice...') in the IETF Host Resources MIB (RFC 2790). |
| DAT xcmSvcMonGeneralVersionDate | 1.3.6.1.4.1.253.8.74.1.2.1.4 | DateAndTime | read-only | The software build date of the SNMP sub-agent which implements the XCMI Service Monitoring MIB on this host system. Usage: This object SHALL specify the BUILD date of the SNMP sub-agent software (not available elsewhere in IETF/XCMI MIBs). This object SHALL NOT specify the INSTALL date of the SNMP sub-agent software on this host system, nor the RESET date. Note: Contrast with 'hrSWInstalledDate' in the Software Installed group of the IETF Host Resources MIB (RFC 2790), and 'xcmHrDevInfoResetDate' in the Device Info group of the XCMI Host Resources Extensions MIB. |
| XCM xcmSvcMonGeneralGroupSupport | 1.3.6.1.4.1.253.8.74.1.2.1.5 | XcmSvcMonGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Service Monitoring MIB groups supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Service Monitoring MIB groups. |
| XCM xcmSvcMonGeneralCreateSupport | 1.3.6.1.4.1.253.8.74.1.2.1.6 | XcmSvcMonGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Service Monitoring MIB groups supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Service Monitoring MIB groups. |
| XCM xcmSvcMonGeneralUpdateSupport | 1.3.6.1.4.1.253.8.74.1.2.1.7 | XcmSvcMonGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Service Monitoring MIB groups supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Service Monitoring MIB groups. |
| xcmSvcMonMIBConformance | 1.3.6.1.4.1.253.8.74.2 | |||
| xcmSvcMonMIBGroups | 1.3.6.1.4.1.253.8.74.2.2 | |||
| xcmSvcMonGeneralGroup | 1.3.6.1.4.1.253.8.74.2.2.1 | The Service Monitoring General Group. | ||
| xcmSvcMonQueueGroup | 1.3.6.1.4.1.253.8.74.2.2.3 | The Service Monitoring Associated Queue Group. | ||
| xcmSvcMonQueueExtGroup | 1.3.6.1.4.1.253.8.74.2.2.4 | The Service Monitoring Associated Queue Ext Group. | ||
| xcmSvcMonServiceGroup | 1.3.6.1.4.1.253.8.74.2.2.5 | The Service Monitoring Service Group. | ||
| xcmSvcMonServiceDetailGroup | 1.3.6.1.4.1.253.8.74.2.2.6 | The Service Monitoring Service Detail Group. | ||
| xcmSvcMonServiceMgmtGroup | 1.3.6.1.4.1.253.8.74.2.2.7 | The Service Monitoring Service Mgmt Group. | ||
| xcmSvcMonMIBCompliance | 1.3.6.1.4.1.253.8.74.2.3 | The compliance statements for SNMP management agents that implement the Service Monitoring MIB. | ||
| xcmSvcMonQueue | 1.3.6.1.4.1.253.8.74.3 | |||
| xcmSvcMonQueueTable | 1.3.6.1.4.1.253.8.74.3.2 | not-accessible | A table of the external job queues supported and (possibly) active, for some 'physical', 'logical', or 'logicalAndPhysical' device on this host system. Usage: These externally visible job queues MAY actually be configured on external print/file servers (remote) or on the managed system itself (local). Usage: For example, a 'logical printer' might support one or more external (network) job queues. Note: The 'xcmJobGenBasicTable' in the XCMI Job Monitoring MIB (indexed by 'hrDeviceIndex' from the IETF Host Resources MIB) displays the unordered union of all jobs present in the (one or more) 'local' queues supported by each 'physical', 'logical', or 'logicalAndPhysical' device on this host system. Note: The XCMI Comms Engine MIB is indexed by devices of type 'CPU', while the 'xcmSvcMonQueueTable' is indexed by application devices of type 'printer', 'fax', etc. Usage: Throughout this specification, the term 'stable storage' refers to storage which is reliable over long durations (years) and is NOT destroyed by host system reboot (eg, battery-backed DRAM is 'stable storage' - while simple DRAM is NOT 'stable storage'). Examples of valid 'stable storage' include: NVRAM, hard disk, EEPROM, etc. Usage: Conforming implementations SHALL preserve active queue table objects across management agent power cycles, and SHALL implement one of the following two methods: 1) The agent SHALL store queue table objects directly in 'stable storage'; or 2) The agent SHALL automatically checkpoint all active queue table objects to 'stable storage' with reasonable frequency (either due to a write to some queue table object, or upon expiration of a product-specific timeout). Usage: Conforming implementations MAY (optionally) support one of the following two 'checkpoint protocols': 1) A client sends a 'Set' of 'xcmSvcMonQueueRowStatus' to 'active(1)', to request that a 'checkpoint' be performed; 2a) An agent which supports 'rapid checkpoint', completes the checkpoint to 'stable storage', and sends a 'SetResponse' with 'noError(0)'; 2b) An agent which supports 'delayed checkpoint', changes 'xcmSvcMonQueueRowStatus' to 'notInService(2)', sends a 'SetResponse' with 'noError(0)', completes the checkpoint to 'stable storage', and changes 'xcmSvcMonQueueRowStatus' back to 'active(1)'. | |
| xcmSvcMonQueueEntry | 1.3.6.1.4.1.253.8.74.3.2.1 | not-accessible | An entry for an external job queue supported and (possibly) active, for some 'physical', 'logical', or 'logicalAndPhysical' device on this host system. Usage: This externally visible job queue MAY actually be configured on an external print/file server (remote) or on the managed system itself (local). | |
| ORD xcmSvcMonQueueIndex | 1.3.6.1.4.1.253.8.74.3.2.1.1 | Ordinal32 | read-only | A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonQueueTable'. Usage: This object SHALL be permanent (ie, preserved across all hardware resets). |
| ROW xcmSvcMonQueueRowStatus | 1.3.6.1.4.1.253.8.74.3.2.1.2 | RowStatus | read-create | This object is used to create and delete individual conceptual rows in the 'xcmSvcMonQueueTable' and (optionally) in the 'xcmSvcMonQueueExtTable' (if implementated on this system). Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonQueueRowStatus' row status object; and SHALL clear the 'svcMonQueueGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonQueueRowStatus' row status object; and SHALL set the 'svcMonQueueGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object. |
| XCM xcmSvcMonQueueDomain | 1.3.6.1.4.1.253.8.74.3.2.1.3 | XcmCommsStackExtProtocol | read-create | The queue namespace domain (directory protocol) for the queue path and queue name (eg, 'internetDNS', 'netwareNDS'). Usage: This queue namespace domain SHALL be a valid directory protocol enumeration from 'XcmCommsStackExtProtocol' in the XCMI Comms Engine TC. Usage: When a remote management station (client) creates a row in 'xcmSvcMonQueueTable' (via 'xcmSvcMonQueueRowStatus'), this queue namespace domain SHALL be specified. Note: For implementation efficiency, this object uses the integer 'XcmCommStackExtProtocol' values (from the XCMI Comms Engine MIB) rather than the equivalent 'XcmCO...' OID values (from the XCMI Comms Config MIB). |
| STR xcmSvcMonQueuePath | 1.3.6.1.4.1.253.8.74.3.2.1.4 | XcmFixedLocaleDisplayString | read-create | Human-readable queue path, used by system administrators and end-users to specify the 'full network path' of a file server (eg, Novell Bindery) or directory tree (eg, Novell NDS) which, when prefixed to the following 'xcmSvcMonQueueName' object, specifies a 'full network queue name' of this queue. Usage: This queue path SHOULD be the one normally used in a command shell for control of this queue. Usage: When a remote management station (client) creates a row in 'xcmSvcMonQueueTable' (via 'xcmSvcMonQueueRowStatus'), this queue path SHALL be specified. |
| STR xcmSvcMonQueueName | 1.3.6.1.4.1.253.8.74.3.2.1.5 | XcmFixedLocaleDisplayString | read-create | Human-readable queue name, used by system administrators and end-users to specify the 'simple name' of this queue (or in the Novell NDS case, the context and simple name concatenated), which, when suffixed to the preceding 'xcmSvcMonQueuePath' object, specifies a 'full network queue name' of this queue. Usage: This queue name SHOULD be the one normally used in a command shell for control of this queue. Usage: When a remote management station (client) creates a row in 'xcmSvcMonQueueTable' (via 'xcmSvcMonQueueRowStatus'), this queue name SHALL be specified. |
| T/F xcmSvcMonQueueOnSystem | 1.3.6.1.4.1.253.8.74.3.2.1.6 | TruthValue | read-create | Specifies whether this queue is present on this host system (local) or is on another network system (remote). |
| xcmSvcMonQueueExt | 1.3.6.1.4.1.253.8.74.4 | |||
| xcmSvcMonQueueExtV1EventOID | 1.3.6.1.4.1.253.8.74.4.1 | The value of the enterprise-specific OID in an SNMPv1 trap sent whenever 'xcmSvcMonQueue[State|Conditions|FaultCount]' changes. See SNMPv2 trap definition 'xcmSvcMonQueueExtV2Event' below for 'special semantics'. | ||
| xcmSvcMonQueueExtV2EventPrefix | 1.3.6.1.4.1.253.8.74.4.1.0 | |||
| NTF xcmSvcMonQueueExtV2Event | 1.3.6.1.4.1.253.8.74.4.1.0.1 | This is the definition of the SNMPv2 trap sent whenever 'xcmSvcMonQueue[State|Conditions|FaultCount]' changes. Note: The variable-bindings of this trap have been chosen to specify a complete associated queue status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The queue's 'xcmSvcMonQueueIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows service management/monitoring applications to limit the alerts they receive to ones generated by associated queues of interest. | ||
| xcmSvcMonQueueExtTable | 1.3.6.1.4.1.253.8.74.4.2 | not-accessible | A table which augments 'xcmSvcMonQueueTable', with dynamic queue routing (forwarding), state, conditions, fault info, create date, lifetime jobs, and last connect date and jobs. Usage: Conforming implementations SHALL preserve active queue table objects across management agent power cycles, and SHALL implement one of the following two methods: 1) The agent SHALL store queue table objects directly in 'stable storage'; or 2) The agent SHALL automatically checkpoint all active queue table objects to 'stable storage' with reasonable frequency (either due to a write to some queue table object, or upon expiration of a product-specific timeout). | |
| xcmSvcMonQueueExtEntry | 1.3.6.1.4.1.253.8.74.4.2.1 | not-accessible | An entry which augments 'xcmSvcMonQueueTable', with dynamic queue routing (forwarding), state, conditions, and fault info. | |
| CAR xcmSvcMonQueueRoutingIndex | 1.3.6.1.4.1.253.8.74.4.2.1.1 | Cardinal32 | read-create | The (optional) routing index of this queue. Usage: This (optional) routing index, for queue indirection mapping, specifies 'xcmSvcMonQueueIndex' for the NEXT queue closer to (or on) this host system, or zero if none. Usage: It is common for more than one off-system (remote) queue to be forwarded to the same on-system (local) queue. Multiple off-system (remote) entries in the 'xcmSvcMonQueueTable' (for a given device) MAY forward to the same on-system (local) entry. |
| XCM xcmSvcMonQueueState | 1.3.6.1.4.1.253.8.74.4.2.1.2 | XcmCommsMgmtState | read-only | The current state of this queue. Usage: This queue state specifies the operational state of the application service or the network communications path to this queue. Usage: This queue state need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue state SHALL be as reported in the XCMI Comms Config/Engine MIB objects for this queue. |
| XCM xcmSvcMonQueueConditions | 1.3.6.1.4.1.253.8.74.4.2.1.3 | XcmCommsMgmtConditions | read-only | The current conditions (ie, state reasons) of this queue. Usage: These queue conditions qualify the operational state of the application service or the network communications path to this queue. Usage: These queue conditions need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: These queue conditions SHALL be as reported in the XCMI Comms Config/Engine MIB objects for this queue. |
| C32 xcmSvcMonQueueFaultCount | 1.3.6.1.4.1.253.8.74.4.2.1.4 | Counter32 | read-only | The current fault count of this queue. Usage: This queue fault count qualifies the operational state of the application service or the network communications path to this queue. Usage: This queue fault count need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue fault count SHALL be as reported in any relevant device- or service-specific MIB for this queue. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems SHALL zero this counter upon conceptual row creation. |
| I32 xcmSvcMonQueueFaultCodeEx | 1.3.6.1.4.1.253.8.74.4.2.1.5 | Integer32 | read-only | Encoded current fault code of this queue. Usage: This queue fault code qualifies the operational state of the application service or the network communications path to this queue. Usage: This queue fault code need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue fault code SHALL be as reported in any relevant device- or service-specific MIB for this queue. |
| STR xcmSvcMonQueueFaultString | 1.3.6.1.4.1.253.8.74.4.2.1.6 | XcmFixedLocaleDisplayString | read-only | Human-readable current fault string of this queue. Usage: This queue fault string qualifies the operational state of the application service or the network communications path to this queue. Usage: This queue fault string need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue fault string SHALL be as reported in any relevant device- or service-specific MIB for this queue. |
| DAT xcmSvcMonQueueRowCreateDate | 1.3.6.1.4.1.253.8.74.4.2.1.7 | DateAndTime | read-only | The date and time of creation of this conceptual row in the 'xcmSvcMonQueueTable' (and 'xcmSvcMonQueueExtTable'). |
| C32 xcmSvcMonQueueRowTotalJobs | 1.3.6.1.4.1.253.8.74.4.2.1.8 | Counter32 | read-only | The total jobs completed for this remote/local external job queue, since 'xcmSvcMonQueueRowCreateDate'. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems SHALL zero this counter upon conceptual row creation. |
| DAT xcmSvcMonQueueLastConnectDate | 1.3.6.1.4.1.253.8.74.4.2.1.9 | DateAndTime | read-only | The date and time of last connect (and/or login) to this remote or local external job queue. |
| C32 xcmSvcMonQueueLastConnectJobs | 1.3.6.1.4.1.253.8.74.4.2.1.10 | Counter32 | read-only | The total jobs completed for this remote/local external job queue, since 'xcmSvcMonQueueLastConnectDate'. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems SHALL zero this counter upon conceptual row creation. |
| xcmSvcMonService | 1.3.6.1.4.1.253.8.74.5 | |||
| xcmSvcMonServiceV1EventOID | 1.3.6.1.4.1.253.8.74.5.1 | The value of the enterprise-specific OID in an SNMPv1 trap sent whenever a service status changes. See SNMPv2 trap definition 'xcmSvcMonServiceV2Event' below for 'special semantics'. | ||
| xcmSvcMonServiceV2EventPrefix | 1.3.6.1.4.1.253.8.74.5.1.0 | |||
| NTF xcmSvcMonServiceV2Event | 1.3.6.1.4.1.253.8.74.5.1.0.1 | This trap is sent whenever 'XcmSvcMonService[CurrentState|Conditions]' changes. Note: The variable-bindings of this trap have been chosen to specify a complete service status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The service's 'xcmSvcMonServiceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows service management/monitoring applications to limit the alerts they receive to ones generated by services of interest. | ||
| xcmSvcMonServiceTable | 1.3.6.1.4.1.253.8.74.5.2 | not-accessible | A table of the system and/or end-user services supported and (possibly) ready on this host system, and (possibly) associated with one or more 'physical', 'logical', or 'logicalAndPhysical' devices on this host system presenting job services and one or more external devices (for security, accounting, etc), attached to this host system. | |
| xcmSvcMonServiceEntry | 1.3.6.1.4.1.253.8.74.5.2.1 | not-accessible | An entry for a system and/or end-user service supported and (possibly) ready on this host system, and (possibly) associated with one or more 'physical', 'logical', or 'logicalAndPhysical' devices on this host system presenting job services and one or more external devices (for security, accounting, etc), attached to this host system. | |
| ORD xcmSvcMonServiceIndex | 1.3.6.1.4.1.253.8.74.5.2.1.1 | Ordinal32 | read-only | A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonServiceTable'. Usage: Conforming management stations and management agents SHALL ensure that 'xcmSvcMonServiceIndex' is equal to 'xcmSecServiceIndex' for the same service (if the XCMI Security MIB is also implemented). Usage: This object SHALL be permanent (ie, preserved across all hardware resets). |
| ROW xcmSvcMonServiceRowStatus | 1.3.6.1.4.1.253.8.74.5.2.1.2 | RowStatus | read-create | This object is used to create and delete individual conceptual rows in the 'xcmSvcMonServiceTable' and (optionally) in the 'xcmSvcMonServiceMgmtTable' (if implemented on this system). Usage: Conforming management stations and management agents SHALL ensure that 'xcmSvcMonServiceIndex' is equal to 'xcmSecServiceIndex' for the same service (if the XCMI Security MIB is also implemented). Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonServiceRowStatus' row status object; and SHALL clear the 'svcMonServiceGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonServiceRowStatus' row status object; and SHALL set the 'svcMonServiceGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object. |
| STR xcmSvcMonServiceName | 1.3.6.1.4.1.253.8.74.5.2.1.3 | XcmFixedLocaleDisplayString | read-create | A human-readable name, used by system administrators and end-users to identify this service. Usage: This name SHALL be either: a) the name normally used in a command shell for control of this service (eg, 'showstopper.sample.com/bin/scan2file'); or b) the local user-friendly service name (eg, 'ScanToFile'). Usage: Conforming implementations need NOT ensure that each 'xcmSvcMonServiceEntry' has a non-empty (on the managed system) 'xcmSvcMonServiceName' (ie, names support is optional), but a given 'xcmSvcMonServiceName' SHALL be found via the same value of 'xcmSecServiceIndex' on the same managed system (ie, service names SHALL be persistent). |
| XCM xcmSvcMonServiceCurrentState | 1.3.6.1.4.1.253.8.74.5.2.1.4 | XcmHrDpaState | read-only | The current state of this system and/or end-user service. Usage: The current DPA object generic state of a service. |
| XCM xcmSvcMonServicePreviousState | 1.3.6.1.4.1.253.8.74.5.2.1.5 | XcmHrDpaState | read-only | The previous state of this system and/or end-user service. Usage: The previous DPA object generic state of a service. |
| XCM xcmSvcMonServiceConditions | 1.3.6.1.4.1.253.8.74.5.2.1.6 | XcmHrDpaConditions | read-only | The current conditions (ie, state reasons) of this system and/or end-user service. |
| XCM xcmSvcMonServiceAvailability | 1.3.6.1.4.1.253.8.74.5.2.1.7 | XcmHrDpaAvailability | read-only | The availability of this system and/or end-user service. |
| CAR xcmSvcMonServicePhysicalDevice | 1.3.6.1.4.1.253.8.74.5.2.1.8 | Cardinal32 | read-create | The value of 'hrDeviceIndex' corresponding to the first associated physical device row in the 'hrDeviceTable' in the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrDevInfoTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: Conforming implementations SHALL ensure that physical devices underlying services are 'visible'. |
| CAR xcmSvcMonServiceLogicalDevice | 1.3.6.1.4.1.253.8.74.5.2.1.9 | Cardinal32 | read-create | The value of 'hrDeviceIndex' corresponding to the first associated logical device row in the 'hrDeviceTable' in the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrDevInfoTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: Conforming implementations SHALL ensure that logical devices presenting services are 'visible'. |
| CAR xcmSvcMonServiceExternalDevice | 1.3.6.1.4.1.253.8.74.5.2.1.10 | Cardinal32 | read-create | The value of 'hrDeviceIndex' corresponding to the first associated external device row in the 'hrDeviceTable' in the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrDevInfoTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: Such an external device is termed a 'foreign attachment' and SHALL have 'xcmHrDevInfoRealization' of 'physical' in the Device Info group of the XCMI Ext to Host Resources MIB - such a device performs some security processing (any authentication, authorization, or accounting), job processing, job finishing, or other off-system activity, on behalf of this service. |
| CAR xcmSvcMonServiceSWRun | 1.3.6.1.4.1.253.8.74.5.2.1.11 | Cardinal32 | read-create | The value of 'hrSWRunIndex' corresponding to the first associated conceptual row in the 'hrSWRunTable' of the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrSWRunTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: A 'chain' of one or more Software Running entries in the Host Resources MIB MAY be associated with this service. By convention, the FIRST of these entries SHALL represent the security functional unit of this service. |
| CAR xcmSvcMonServiceSWInstalled | 1.3.6.1.4.1.253.8.74.5.2.1.12 | Cardinal32 | read-create | The value of 'hrSWInstalledIndex' corresponding to the first associated conceptual row in the 'hrSWInstalledTable' of the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrSWInstalledTable' in XCMI Ext to Host Resources MIB, or zero if none. Usage: A 'chain' of one or more Software Installed entries in the Host Resources MIB MAY be associated with a service. By convention, the FIRST of these entries SHALL represent the security functional unit of a service. |
| CAR xcmSvcMonServiceStorage | 1.3.6.1.4.1.253.8.74.5.2.1.13 | Cardinal32 | read-create | The value of 'hrStorageIndex' corresponding to the first associated conceptual row in the 'hrStorageTable' of the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrStorageTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: A 'chain' of one or more Storage entries in the Host Resources MIB MAY be associated with a service. |
| INT xcmSvcMonServicePriority | 1.3.6.1.4.1.253.8.74.5.2.1.14 | INTEGER | read-create | The current priority of this system and/or end-user service. Usage: The scheduling priority of this service, where '0' is unspecified (default), '1' is lowest, and '100' is highest. |
| XCM xCmSvcMonServiceType | 1.3.6.1.4.1.253.8.74.5.2.1.15 | XcmSvcMonServiceType | read-create | The explicit type of this system and/or end-user service. |
| OCT xcmSvcMonServiceStateDetail | 1.3.6.1.4.1.253.8.74.5.2.1.16 | OCTET STRING | read-only | This object represents additional status details to further describe the current state of the service. Usage: This bit-array is constructed from the set of supported values from 'XcmSvcMonServiceStateDetail', used as powers of 2 with big-endian rules - the high-order bit of the first octet corresponds to a service state detail '0' (reserved) - the low-order bit of the first octet corresponds to a service state detail of '7'. Similar to the BITS pseudotype defined in IETF SMIv2 (RFC 2578), which has the same bit ordering rules but requires definitions for contiguous enumerated bits. |
| xcmSvcMonServiceDetail | 1.3.6.1.4.1.253.8.74.6 | |||
| xcmSvcMonServiceDetailTable | 1.3.6.1.4.1.253.8.74.6.2 | not-accessible | A 'sparse' table containing service detail information for installed and (possibly) active services on this host system, augmenting the basic entries in the 'xcmSvcMonServiceTable' of the XCMI Service Monitoring MIB. Usage: UNLIKE the 'xcmGenOptionTable' in the XCMI General MIB (which is a unique exception), this table of 'dictionary-based' service details is used with DIRECT create/update operations. | |
| xcmSvcMonServiceDetailEntry | 1.3.6.1.4.1.253.8.74.6.2.1 | not-accessible | A 'sparse' entry containing service detail information for an installed and (possibly) active service on this host system, augmenting a basic entry in the 'xcmSvcMonServiceTable' of the XCMI Service Monitoring MIB. | |
| XCM xCmSvcMonServiceDetailClass | 1.3.6.1.4.1.253.8.74.6.2.1.1 | XcmSvcMonServiceDetailClass | not-accessible | A service detail class, used by system administrators and end users to specify the correct class for this service detail. |
| XCM xCmSvcMonServiceDetailType | 1.3.6.1.4.1.253.8.74.6.2.1.2 | XcmSvcMonServiceDetailType | not-accessible | A service detail type, used by system administrators and end users to specify the correct type for this service detail. |
| ORD xcmSvcMonServiceDetailIndex | 1.3.6.1.4.1.253.8.74.6.2.1.3 | Ordinal32 | not-accessible | A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonServiceDetailTable', OR a common value shared across a set of related conceptual rows (with different values of 'xcmSvcMonServiceDetailType'. Usage: For service detail types which are single-valued, this index SHALL be used to correlate related single-valued details. Usage: For service detail types which are multi-valued, this index SHALL be used to enumerate lists of multi-valued details. |
| ROW xcmSvcMonServiceDetailRowStatus | 1.3.6.1.4.1.253.8.74.6.2.1.4 | RowStatus | read-create | This object is used to create and delete individual conceptual rows in the 'xcmSvcMonServiceDetailTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonServiceDetailRowStatus' row status object; and SHALL clear the 'svcMonServiceDetailGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonServiceDetailRowStatus' row status object; and SHALL set the 'svcMonServiceDetailGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object. |
| XCM xcmSvcMonServiceDetailUnitClass | 1.3.6.1.4.1.253.8.74.6.2.1.5 | XcmHrDevDetailUnitClass | read-create | The value unit class of the detail information specified in this conceptual row in the 'xcmSvcMonServiceDetailTable'. Usage: Used to select a textual convention for specifying the value unit of this service detail. Usage: The 'xcmSvcMonServiceDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmSvcMonServiceDetail[Integer|OID|String]' value objects. |
| CAR xcmSvcMonServiceDetailUnit | 1.3.6.1.4.1.253.8.74.6.2.1.6 | Cardinal32 | read-create | The value unit of the detail information specified in this conceptual row in the 'xcmSvcMonServiceDetailTable'. Usage: Used to select an enumerated choice from a textual convention to specify the value unit of this service detail. Usage: The 'xcmSvcMonServiceDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmSvcMonServiceDetail[Integer|OID|String]' value objects. |
| I32 xcmSvcMonServiceDetailInteger | 1.3.6.1.4.1.253.8.74.6.2.1.7 | Integer32 | read-create | A service detail value integer, used by system administrators and end users to specify the current value for a service detail with a base value syntax of 'INTEGER'. |
| OID xcmSvcMonServiceDetailOID | 1.3.6.1.4.1.253.8.74.6.2.1.8 | OBJECT IDENTIFIER | read-create | A service detail value OID (object identifier), used by system administrators and end users to specify the current value for a service detail with a base value syntax of 'OBJECT IDENTIFIER'. |
| OCT xcmSvcMonServiceDetailString | 1.3.6.1.4.1.253.8.74.6.2.1.9 | OCTET STRING | read-create | A service detail value string, used by system administrators and end users to specify the current value for a service detail with a base value syntax of 'OCTET STRING'. Usage: This object is of type 'XcmFixedLocaleDisplayString'. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| xcmSvcMonServiceMgmt | 1.3.6.1.4.1.253.8.74.7 | |||
| xcmSvcMonServiceMgmtV1EventOID | 1.3.6.1.4.1.253.8.74.7.1 | The value of the enterprise-specific OID in an SNMPv1 trap sent whenever an 'xcmSvcMonServiceMgmtOperation' completes. See SNMPv2 trap definition 'xcmSvcMonServiceMgmtV2Event' below for 'special semantics'. | ||
| xcmSvcMonServiceMgmtV2EventPrefix | 1.3.6.1.4.1.253.8.74.7.1.0 | |||
| NTF xcmSvcMonServiceMgmtV2Event | 1.3.6.1.4.1.253.8.74.7.1.0.1 | This trap is sent whenever an 'XcmSvcMonServiceMgmtOperation' completes, ie, when 'xcmSvcMonServiceMgmtStatus' becomes the completed operation status and 'XcmSvcMonServiceMgmtInProgress' goes from 'true' to 'false'. Note: The variable-bindings of this trap have been chosen to specify a complete management operation result while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The service's 'xcmSvcMonServiceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows service management/monitoring applications to limit the alerts they receive to ones generated by requests they have submitted. | ||
| xcmSvcMonServiceMgmtTable | 1.3.6.1.4.1.253.8.74.7.2 | not-accessible | A table containing service management requests for control of system and/or end-user services on this host system. | |
| xcmSvcMonServiceMgmtEntry | 1.3.6.1.4.1.253.8.74.7.2.1 | not-accessible | An entry containing a service management request for control of a system and/or end-user service on this host system. | |
| XCM xCmSvcMonServiceMgmtOperation | 1.3.6.1.4.1.253.8.74.7.2.1.1 | XcmSvcMonServiceMgmtOperation | read-create | The most recent service management operation specified for this conceptual row in the 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Request to 'xcmSvcMonServiceMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSvcMonServiceMgmtInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSvcMonServiceMgmtOperation' (mgmt operation) and 'xcmSvcMonServiceMgmtData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Request PDU). |
| XCM xCmSvcMonServiceMgmtData | 1.3.6.1.4.1.253.8.74.7.2.1.2 | XcmSvcMonServiceMgmtData | read-create | The most recent service management data specified for this conceptual row in the 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Request to 'xcmSvcMonServiceMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSvcMonServiceMgmtInProgress' is 'true') with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSvcMonServiceMgmtOperation' (mgmt operation) and 'xcmSvcMonServiceMgmtData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Request PDU). Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: Management strings will be formatted as specified in the 'XcmHrDevMgmtCommandDataTag' textual convention. This means that the 'TT=value:' string format will be used with all management strings. Usage: Strings that have been specified by XCMI are provided in the 'XcmSvcMonServiceMgmtData'. |
| XCM xcmSvcMonServiceMgmtStatus | 1.3.6.1.4.1.253.8.74.7.2.1.3 | XcmGenSNMPv2ErrorStatus | read-only | The service management error status associated with this conceptual row in 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL set this object to the value returned in an SNMP Set-Response PDU when a service management operation is 'accepted', ie, when 'xcmSvcMonServiceMgmtInProgress' goes from 'false' to 'true'. Usage: Conforming management agents SHALL set this object to the value of the completion status of the (possibly deferred) service management operation, when 'xcmSvcMonServiceMgmtInProgress' goes from 'true' to 'false'. |
| T/F xcmSvcMonServiceMgmtInProgress | 1.3.6.1.4.1.253.8.74.7.2.1.4 | TruthValue | read-only | The service management in progress status associated with this conceptual row in 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Request to 'xcmSvcMonServiceMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSvcMonServiceMgmtInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). |
| ROW xcmSvcMonServiceMgmtRowStatus | 1.3.6.1.4.1.253.8.74.7.2.1.5 | RowStatus | read-create | This object manages the row status of this conceptual row in the 'xcmSvcMonServiceMgmtTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonServiceMgmtRowStatus' row status object; and SHALL clear the 'xcmSvcMonServiceMgmtGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonServiceGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonServiceMgmtRowStatus' row status object; and SHALL set the 'xcmSvcMonServiceMgmtGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonServiceGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object. |
| OCT xcmSvcMonServiceMgmtUserPassword | 1.3.6.1.4.1.253.8.74.7.2.1.6 | OCTET STRING | read-create | A protected end user password for this device. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: When changing the [User|Operator|Admin] Password, conformant implementations MUST encrypt the NEW password that is submitted in 'xcmSvcMonServiceMgmtData'. Usage: All XCMI conforming management agents: a) SHOULD always return a zero length string in response to an SNMP GetRequest of this object; b) SHALL NOT return the contents of this object in cleartext (ie, unencrypted) in response to an SNMP GetRequest; c) SHOULD support (ie, accept) an authenticated SNMP SetRequest changing the system 'end user password' that is used in this object. |
| OCT xcmSvcMonServiceMgmtOperatorPassword | 1.3.6.1.4.1.253.8.74.7.2.1.7 | OCTET STRING | read-create | A protected system operator password for this device. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: When changing the [User|Operator|Admin] Password, conformant implementations MUST encrypt the NEW password that is submitted in 'xcmSvcMonServiceMgmtData'. Usage: All XCMI conforming management agents: a) SHOULD always return a zero length string in response to an SNMP GetRequest of this object; b) SHALL NOT return the contents of this object in cleartext (ie, unencrypted) in response to an SNMP GetRequest; c) SHOULD support (ie, accept) an authenticated SNMP SetRequest changing the system 'operator password' that is used in this object. |
| OCT xcmSvcMonServiceMgmtAdminPassword | 1.3.6.1.4.1.253.8.74.7.2.1.8 | OCTET STRING | read-create | A protected system administrator password for this device. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: When changing the [User|Operator|Admin] Password, conformant implementations MUST encrypt the NEW password that is submitted in 'xcmSvcMonServiceMgmtData'. Usage: All XCMI conforming management agents: a) SHOULD always return a zero length string in response to an SNMP GetRequest of this object; b) SHALL NOT return the contents of this object in cleartext (ie, unencrypted) in response to an SNMP GetRequest; c) SHOULD support (ie, accept) an authenticated SNMP SetRequest changing the system 'administrator password' that is used in this object. |
| xcmSimpleJobMgmtTC | 1.3.6.1.4.1.253.8.75 | Version: 5.10.pub Textual Conventions companion to the XCMI Simple Job Mgmt MIB, the MIB module for performing lightweight management of jobs in network accessible host systems. See: Document Printing Application - Part 1: Abstract Service (ISO/IEC 10175-1 / Final Text, March 1996). See: POSIX System Administration - Part 4: Print Interfaces (IEEE 1387.4 / Draft 8, October 1994). See: OSI Reference Model - Part 1: Basic Reference Model (CCITT X.200:1992 | ISO 7498-1:1992). Copyright (C) 1997-2002 Xerox Corporation. All Rights Reserved. | ||
| xCmSimpleJobDummy | 1.3.6.1.4.1.253.8.75.999 | |||
| XCM xCmSimpleJobMgmtGroupSupport | 1.3.6.1.4.1.253.8.75.999.1 | XcmSimpleJobMgmtGroupSupport | not-accessible | Dummy - DO NOT USE |
| xcmSimpleJobMgmtMIB | 1.3.6.1.4.1.253.8.76 | Version: 5.10.pub The MIB module for performing lightweight management of jobs in network accessible host systems. See: Document Printing Application - Part 1: Abstract Service (ISO 10175-1 / Final Text, March 1996). See: POSIX System Administration - Part 4: Print Interfaces (IEEE 1387.4 / Draft 8, October 1994). See: OSI Reference Model - Part 1: Basic Reference Model (CCITT X.200:1992 | ISO 7498-1:1992). Copyright (C) 1997-2002 Xerox Corporation. All Rights Reserved. | ||
| xcmSimpleJobBase | 1.3.6.1.4.1.253.8.76.1 | |||
| xcmSimpleJobBaseTable | 1.3.6.1.4.1.253.8.76.1.2 | not-accessible | A table of general counters and capabilities for ease of use of the XCMI Simple Job Mgmt MIB on this host system. Usage: The ONLY valid row in the 'xcmSimpleJobBaseTable' shall ALWAYS have an 'xcmSimpleJobBaseIndex' of one ('1'). | |
| xcmSimpleJobBaseEntry | 1.3.6.1.4.1.253.8.76.1.2.1 | not-accessible | An entry of general counters and capabilities for ease of use of the XCMI Simple Job Mgmt MIB on this host system. Usage: The ONLY valid row in the 'xcmSimpleJobBaseTable' shall ALWAYS have an 'xcmSimpleJobBaseIndex' of one ('1'). | |
| ORD xcmSimpleJobBaseIndex | 1.3.6.1.4.1.253.8.76.1.2.1.1 | Ordinal32 | not-accessible | A unique value used by this host system to identify this conceptual row in the 'xcmSimpleJobBaseTable'. Usage: The ONLY valid row in the 'xcmSimpleJobBaseTable' shall ALWAYS have an 'xcmSimpleJobBaseIndex' of one ('1'). |
| ROW xcmSimpleJobBaseRowStatus | 1.3.6.1.4.1.253.8.76.1.2.1.2 | RowStatus | read-only | This object is used to display status of the ONLY valid conceptual row in the 'xcmSimpleJobBaseTable'. Usage: 'xcmSimpleJobBaseRowStatus' is 'read-only' because the ONLY valid conceptual row shall NOT be deleted. |
| XCM xcmSimpleJobBaseGroupSupport | 1.3.6.1.4.1.253.8.76.1.2.1.3 | XcmSimpleJobMgmtGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Simple Job Mgmt MIB groups supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Simple Job Mgmt MIB groups. |
| XCM xcmSimpleJobBaseCreateSupport | 1.3.6.1.4.1.253.8.76.1.2.1.4 | XcmSimpleJobMgmtGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Simple Job Mgmt MIB groups supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Simple Job Mgmt MIB groups. |
| XCM xcmSimpleJobBaseUpdateSupport | 1.3.6.1.4.1.253.8.76.1.2.1.5 | XcmSimpleJobMgmtGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Simple Job Mgmt MIB groups supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Simple Job Mgmt MIB groups. |
| xcmSimpleJobMgmtMIBConformance | 1.3.6.1.4.1.253.8.76.2 | |||
| xcmSimpleJobMgmtMIBGroups | 1.3.6.1.4.1.253.8.76.2.2 | |||
| xcmSimpleJobBaseGroup | 1.3.6.1.4.1.253.8.76.2.2.1 | The Simple Job Base Group | ||
| xcmSimpleJobMgmtGroup | 1.3.6.1.4.1.253.8.76.2.2.3 | The Simple Job Mgmt Group | ||
| xcmSimpleJobInterceptGroup | 1.3.6.1.4.1.253.8.76.2.2.4 | The Simple Job Intercept Group | ||
| xcmSimpleJobMgmtMIBCompliance | 1.3.6.1.4.1.253.8.76.2.3 | The compliance statements for SNMP intercept agents that implement the Simple Job Mgmt MIB. | ||
| xcmSimpleJobMgmt | 1.3.6.1.4.1.253.8.76.3 | |||
| xcmSimpleJobMgmtV1EventOID | 1.3.6.1.4.1.253.8.76.3.1 | The value of the enterprise-specific OID in an SNMPv1 trap sent whenever an 'xcmSimpleJobMgmtOperation' completes. See SNMPv2 trap definition 'xcmSimpleJobMgmtV2Event' below for 'special semantics'. | ||
| xcmSimpleJobMgmtV2EventPrefix | 1.3.6.1.4.1.253.8.76.3.1.0 | |||
| NTF xcmSimpleJobMgmtV2Event | 1.3.6.1.4.1.253.8.76.3.1.0.1 | This trap is sent whenever an 'XcmSimpleJobMgmtOperation' completes, ie, when 'xcmSimpleJobMgmtStatus' becomes a completed operation status and 'XcmSimpleJobMgmtInProgress' goes from 'true' to 'false'. Note: The 'hrDeviceIndex' is included for convenience, even though the IETF Printer MIB doesn't include 'hrDeviceIndex' in its traps. Then the management station doesn't have to parse the received varBind OIDs on a trap in order to discover which device trapped. Note: The variable-bindings of this trap have been chosen to specify a complete job management operation result while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o If the job's 'xcmJobClientId' field is non-empty and it is a valid 'XcmGlobalUniqueID' representation, its value shall ALWAYS be appended to this trap object ID, as a BER binary OID suffix. Note: The BER binary OID suffix shall NOT include the BER tag of 6 indicating an OID and shall NOT include the BER length field in octets of the OID suffix. This trap OID qualifier allows job-submission and job-monitoring applications to limit the alerts they receive to ones generated by jobs which they have submitted. Note: The sum of the trap varBind values must be less than can fit into a PDU on any transport, roughly 540 octets on some transports. Thus implementors are warned to minimize the length of the 'xcmJobClientId' and 'xcmJobIdentifierOnSystem' objects. | ||
| xcmSimpleJobMgmtTable | 1.3.6.1.4.1.253.8.76.3.2 | not-accessible | A table which augments the 'xcmJobGenBasicTable' in the XCMI Job Monitoring MIB, to support simple job management of jobs on this host system. | |
| xcmSimpleJobMgmtEntry | 1.3.6.1.4.1.253.8.76.3.2.1 | not-accessible | An entry which augments an 'xcmJobGenBasicEntry' in the XCMI Job Monitoring MIB, to support simple job management of a job on this host system. | |
| XCM xCmSimpleJobMgmtOperation | 1.3.6.1.4.1.253.8.76.3.2.1.1 | XcmSimpleJobMgmtOperation | read-write | The simple job management operation specified for this conceptual row in the 'xcmSimpleJobMgmtTable' and the 'xcmJobGenBasicTable' (XCMI Job Monitoring MIB). Usage: Conforming management agents SHALL 'reject' any SNMP Set-Operation to 'xcmSimpleJobMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSimpleJobMgmtInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSimpleJobMgmtOperation' (mgmt operation) and 'xcmSimpleJobMgmtData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Operation PDU). Usage: Performing 'delete' (system operator) shall ALWAYS force 'xcmJobCurrentState' to 'completed(17)' immediately, and MAY affect 'xcmJobAccountingBasicRowStatus'. Usage: Performing 'remove' (user cancel) shall ALWAYS force 'xcmJobCurrentState' to 'completed(17)' in a timely fashion, but shall NOT affect 'xcmJobAccountingBasicRowStatus'. |
| XCM xCmSimpleJobMgmtData | 1.3.6.1.4.1.253.8.76.3.2.1.2 | XcmSimpleJobMgmtData | read-write | The simple job management data specified for this conceptual row in the 'xcmSimpleJobMgmtTable' and the 'xcmJobGenBasicTable' (XCMI Job Monitoring MIB). Usage: Conforming management agents SHALL 'reject' any SNMP Set-Operation to 'xcmSimpleJobMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSimpleJobMgmtInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSimpleJobMgmtOperation' (mgmt operation) and 'xcmSimpleJobMgmtData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Operation PDU). |
| XCM xcmSimpleJobMgmtStatus | 1.3.6.1.4.1.253.8.76.3.2.1.3 | XcmGenSNMPv2ErrorStatus | read-only | The simple job management error status associated with this conceptual row in 'xcmSimpleJobMgmtTable'. Usage: Conforming management agents shall ALWAYS set this object to the value returned in an SNMP Set-Response PDU when a simple job management operation is 'accepted', ie, when 'xcmSimpleJobMgmtInProgress' goes from 'false' to 'true'. Usage: Conforming management agents shall ALWAYS set this object to the value of the completion status of the (possibly deferred) simple job management operation, when 'xcmSimpleJobMgmtInProgress' goes from 'true' to 'false'. |
| T/F xcmSimpleJobMgmtInProgress | 1.3.6.1.4.1.253.8.76.3.2.1.4 | TruthValue | read-only | The simple job management in progress status associated with this conceptual row in 'xcmSimpleJobMgmtTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Operation to 'xcmSimpleJobMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSimpleJobMgmtInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). |
| xcmSimpleJobIntercept | 1.3.6.1.4.1.253.8.76.4 | |||
| xcmSimpleJobInterceptV1EventOID | 1.3.6.1.4.1.253.8.76.4.1 | The value of the enterprise-specific OID in an SNMPv1 trap sent whenever an 'xcmSimpleJobInterceptOperation' completes. See SNMPv2 trap definition 'xcmSimpleJobInterceptV2Event' below for 'special semantics'. | ||
| xcmSimpleJobInterceptV2EventPrefix | 1.3.6.1.4.1.253.8.76.4.1.0 | |||
| NTF xcmSimpleJobInterceptV2Event | 1.3.6.1.4.1.253.8.76.4.1.0.1 | This trap is sent whenever an 'XcmSimpleJobInterceptOperation' completes. Note: The variable-bindings of this trap have been chosen to specify a complete job intercept operation result while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o If 'xcmSimpleJobInterceptClientId' is non-empty and it is a valid 'XcmGlobalUniqueID' representation, its value shall ALWAYS be appended to this trap object ID, as a BER binary OID suffix. Note: The BER binary OID suffix shall NOT include the BER tag of 6 indicating an OID and shall NOT include the BER length field in octets of the OID suffix. This trap OID qualifier allows job-submission and job-monitoring applications to limit the alerts they receive to ones generated by jobs which they have submitted. Note: The sum of the trap varBind values must be less than can fit into a PDU on any transport, roughly 540 octets on some transports. Thus implementors are warned to minimize the length of the 'xcmJobClientId' and 'xcmJobIdentifierOnSystem' objects. | ||
| xcmSimpleJobInterceptTable | 1.3.6.1.4.1.253.8.76.4.2 | not-accessible | A table which is indexed by the future 'xcmJobClientId' in the XCMI Job Monitoring MIB, to support simple job intercept requests for upstream jobs (off this host system). | |
| xcmSimpleJobInterceptEntry | 1.3.6.1.4.1.253.8.76.4.2.1 | not-accessible | An entry which is indexed by the future 'xcmJobClientId' in the XCMI Job Monitoring MIB, to support a simple job intercept request for an upstream job (off this host system). | |
| STR xcmSimpleJobInterceptClientId | 1.3.6.1.4.1.253.8.76.4.2.1.1 | XcmFixedLocaleDisplayString | read-only | A unique value used by this host system to identify this conceptual row in the 'xcmSimpleJobInterceptTable'. Usage: The future value of 'xcmJobClientId' from the XCMI Job Monitoring MIB which uniquely identifies this client's job. Usage: XCMI conforming management agents MAY choose to REJECT any attempt at row creation in the 'xcmSimpleJobInterceptTable' which specifies a value for 'xcmSimpleJobInterceptClientId' that does NOT conform to the 'XcmGlobalUniqueID' format (therefore cannot be appended onto the trap OID for any job-related traps). Usage: XCMI conforming management agents MAY choose to ACCEPT any attempt at row creation in the 'xcmSimpleJobInterceptTable' which specifies a value for 'xcmSimpleJobInterceptClientId' that is nonetheless unique in the scope of the managed system (but not append it onto the trap OID for any job-related traps). Usage: XCMI conforming management stations (ie, clients) shall ALWAYS submit an 'xcmJobClientId' in 'XcmGlobalUniqueID' format. XCMI conforming management agents (ie, servers and devices) shall ALWAYS append such an 'xcmJobClientId' onto the trap OID for any job-related traps. Usage: Non-XCMI conforming management stations (ie, clients) MAY submit a non-unique 'xcmJobClientId', although they may be otherwise strictly conformant DPA (ISO 10175) clients. |
| ROW xcmSimpleJobInterceptRowStatus | 1.3.6.1.4.1.253.8.76.4.2.1.2 | RowStatus | read-create | This object is used to create and destroy individual conceptual rows in 'xcmSimpleJobInterceptTable'. |
| XCM xcmSimpleJobInterceptOperation | 1.3.6.1.4.1.253.8.76.4.2.1.3 | XcmSimpleJobMgmtOperation | read-create | The simple job intercept operation specified for this conceptual row in the 'xcmSimpleJobInterceptTable' and the 'xcmJobClientId' object (XCMI Job Monitoring MIB). Usage: Conforming management agents SHALL 'reject' any SNMP Set-Operation to 'xcmSimpleJobIntercept[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSimpleJobInterceptInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSimpleJobInterceptOperation' (mgmt operation) and 'xcmSimpleJobInterceptData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Operation PDU). |
| XCM xcmSimpleJobInterceptData | 1.3.6.1.4.1.253.8.76.4.2.1.4 | XcmSimpleJobMgmtData | read-create | The simple job intercept data specified for this conceptual row in the 'xcmSimpleJobInterceptTable' and the 'xcmJobClientId' object (XCMI Job Monitoring MIB). Usage: Conforming management agents SHALL 'reject' any SNMP Set-Operation to 'xcmSimpleJobIntercept[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSimpleJobInterceptInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSimpleJobInterceptOperation' (mgmt operation) and 'xcmSimpleJobInterceptData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Operation PDU). |
| XCM xcmSimpleJobInterceptStatus | 1.3.6.1.4.1.253.8.76.4.2.1.5 | XcmGenSNMPv2ErrorStatus | read-only | The simple job intercept error status associated with this conceptual row in 'xcmSimpleJobInterceptTable'. Usage: Conforming management agents shall ALWAYS set this object to the value returned in an SNMP Set-Response PDU when a simple job intercept operation is 'accepted', ie, when 'xcmSimpleJobInterceptInProgress' goes from 'false' to 'true'. Usage: Conforming management agents shall ALWAYS set this object to the value of the completion status of the (possibly deferred) simple job intercept operation, when 'xcmSimpleJobInterceptInProgress' goes from 'true' to 'false'. |
| T/F xcmSimpleJobInterceptInProgress | 1.3.6.1.4.1.253.8.76.4.2.1.6 | TruthValue | read-only | The simple job intercept in progress status associated with this conceptual row in 'xcmSimpleJobInterceptTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Operation to 'xcmSimpleJobIntercept[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSimpleJobInterceptInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). |
| xcmJmxMIB | 1.3.6.1.4.1.253.8.83 | Version: 5.401.pub The MIB module for job administration and job notifications for systems that implement the PWG Job Monitoring MIB (RFC 2707). See: Section 7 'Conformance Requirements and Implementers Guide' of the XCMI Job Monitoring TC (40jobtc.txt) for implementation and conformance guidance for the PWG Job Monitoring MIB (RFC 2707) and for mapping to the XCMI Job Monitoring MIB. Copyright (C) 2001-2002 Xerox Corporation. All Rights Reserved. | ||
| xcmJmxMIBObjects | 1.3.6.1.4.1.253.8.83.1 | |||
| xcmJmxGeneral | 1.3.6.1.4.1.253.8.83.1.1 | |||
| xcmJmxGeneralTable | 1.3.6.1.4.1.253.8.83.1.1.2 | not-accessible | A table of general counters and information for ease of use of the XCMI Ext to PWG Job Monitoring MIB and the PWG Job Monitoring MIB (RFC 2707) on this host system. Usage: The ONLY valid row in the 'xcmJmxGeneralTable' shall ALWAYS have an 'xcmJmxGeneralIndex' of one ('1'). | |
| xcmJmxGeneralEntry | 1.3.6.1.4.1.253.8.83.1.1.2.1 | not-accessible | An entry of general counters and information for ease of use of the XCMI Ext to PWG Job Monitoring MIB and the PWG Job Monitoring MIB (RFC 2707) on this host system. Usage: The ONLY valid row in the 'xcmJmxGeneralTable' shall ALWAYS have an 'xcmJmxGeneralIndex' of one ('1'). | |
| ORD xcmJmxGeneralIndex | 1.3.6.1.4.1.253.8.83.1.1.2.1.1 | Ordinal32 | not-accessible | A unique value used by this host system to identify this conceptual row in the 'xcmJmxGeneralTable'. Usage: The ONLY valid row in the 'xcmJmxGeneralTable' shall ALWAYS have an 'xcmJmxGeneralIndex' of one ('1'). |
| XCM xcmJmxGeneralGroupSupport | 1.3.6.1.4.1.253.8.83.1.1.2.1.2 | XcmJmxGroupSupport | read-only | The terse conformance statement of ALL mandatory, conditionally mandatory, and optional PWG Job Monitoring MIB (RFC 2707) and XCMI Ext to PWG Job Monitoring MIB objects which are supported by this management agent implementation (i.e., version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for PWG Job Monitoring MIB (RFC 2707) and XCMI Ext to PWG Job Monitoring MIB object groups. |
| C32 xcmJmxGeneralJobCreatedCount | 1.3.6.1.4.1.253.8.83.1.1.2.1.3 | Counter32 | read-only | Total number of jobs that have been created on this managed system. The managed system MAY preserve this count across initializations and resets. Usage: If the value of this counter is not preserved across initializations and resets, then it SHALL be set to zero upon system initialization or reset. Usage: A managed system SHALL return zero if the number of jobs created is not known. |
| C32 xcmJmxGeneralJobCompletedCount | 1.3.6.1.4.1.253.8.83.1.1.2.1.4 | Counter32 | read-only | Total number of jobs that have completed on this managed system. The managed system MAY preserve this count across initializations and resets. Usage: If the value of this counter is not preserved across initializations and resets, then it SHALL be set to zero upon system initialization or reset. Usage: A managed system SHALL return zero if the number of jobs created is not known. |
| C32 xcmJmxGeneralJobOperationCount | 1.3.6.1.4.1.253.8.83.1.1.2.1.5 | Counter32 | read-only | Total number of job operations that have been executed on this managed system. The managed system MAY preserve this count across initializations and resets. Usage: If the value of this counter is not preserved across initializations and resets, then it SHALL be set to zero upon system initialization or reset. Usage: A managed system SHALL return zero if the number of jobs created is not known. |
| C32 xcmJmxGeneralJobTrapCount | 1.3.6.1.4.1.253.8.83.1.1.2.1.6 | Counter32 | read-only | Total number of job traps that have been sent from this managed system. The managed system MAY preserve this count across initializations and resets. Usage: If the value of this counter is not preserved across initializations and resets, then it SHALL be set to zero upon system initialization or reset. Usage: A managed system SHALL return zero if the number of jobs created is not known. |
| XCM xcmJmxGeneralJobAccntSupport | 1.3.6.1.4.1.253.8.83.1.1.2.1.7 | XcmJmxJobAccntSupport | read-write | This is a way to turn the Job Accounting in the device on and off when the printer supports the PWG job accounting mib. If the job accounting within the device is off then the group support will report no no group supported. If job accounting is on then the appropriate groups will be reported as supported. |
| xcmJmxJobAdmin | 1.3.6.1.4.1.253.8.83.1.2 | |||
| xcmJmxJobAdminTable | 1.3.6.1.4.1.253.8.83.1.2.1 | not-accessible | A table containing job operation requests for control of jobs on this host system. | |
| xcmJmxJobAdminEntry | 1.3.6.1.4.1.253.8.83.1.2.1.1 | not-accessible | An entry containing a job operation request for control of a job on this host system. | |
| XCM xcmJmxJobAdminOperation | 1.3.6.1.4.1.253.8.83.1.2.1.1.1 | XcmJmxJobAdminOperation | read-write | The current or most recent administrative operation on this job (submitted via SNMP, IPP, or any other job control protocol). Usage: Conforming management agents shall ALWAYS 'reject' any SNMP Set-Request to 'xcmJmxJobAdminOperation' while another job operation request is already in progress (i.e., while 'xcmJmxJobAdminInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). |
| XCM xcmJmxJobAdminStatus | 1.3.6.1.4.1.253.8.83.1.2.1.1.2 | XcmGenSNMPv2ErrorStatus | read-only | The job operation error status associated with this conceptual row in 'xcmJmxJobAdminTable'. Usage: Conforming management agents shall ALWAYS set this object to the value returned in an SNMP Set-Response PDU when a job operation request is 'accepted', ie, when 'xcmJmxJobAdminInProgress' goes from 'false' to 'true'. Usage: Conforming management agents shall ALWAYS set this object to the value of the completion status of the (possibly deferred) job operation request, when 'xcmJmxJobAdminInProgress' goes from 'true' to 'false'. |
| T/F xcmJmxJobAdminInProgress | 1.3.6.1.4.1.253.8.83.1.2.1.1.3 | TruthValue | read-only | The job operation in progress status associated with this conceptual row in 'xcmJmxJobAdminTable'. 'true' if job operation is in progress; otherwise, 'false'. Usage: Conforming management agents shall ALWAYS 'reject' any SNMP Set-Request to 'xcmJmxJobAdminOperation' while another job operation request is already in progress (i.e., while 'xcmJmxJobAdminInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). |
| xcmJmxMIBNotifications | 1.3.6.1.4.1.253.8.83.2 | |||
| xcmJmxJobOperationV1Enterprise | 1.3.6.1.4.1.253.8.83.2.1 | The value of the enterprise-specific OID in an SNMPv1 trap for a Job operation complete event sent by this managed system. | ||
| xcmJmxJobOperationV2TrapPrefix | 1.3.6.1.4.1.253.8.83.2.1.0 | |||
| NTF xcmJmxJobOperationV2Trap | 1.3.6.1.4.1.253.8.83.2.1.0.1 | This SMIv2 trap corresponds to a Job operation complete event. The values of 'jmGeneralJobSetIndex' and 'jmJobIndex' for use with 'jmJobTable' for this Job are conveyed in the instance qualifier (OID suffix) of 'jmJobOperation'. Additional variable-bindings MAY be appended to this trap: - Systems with the Host Resources MIB (RFC 2790) MAY add 'hrSystemDate' (compare to IPP 'printer-current-time') - Systems MAY add other variable-bindings from any MIB | ||
| xcmJmxJobStateV1Enterprise | 1.3.6.1.4.1.253.8.83.2.2 | The value of the enterprise-specific OID in an SNMPv1 trap for a Job state changed event sent by this managed system. | ||
| xcmJmxJobStateV2TrapPrefix | 1.3.6.1.4.1.253.8.83.2.2.0 | |||
| NTF xcmJmxJobStateV2Trap | 1.3.6.1.4.1.253.8.83.2.2.0.1 | This SMIv2 trap corresponds to IPP 'job-state-changed' event. The values of 'jmGeneralJobSetIndex' and 'jmJobIndex' for use with 'jmJobTable' for this Job are conveyed in the instance qualifier (OID suffix) of 'jmJobState'. Additional variable-bindings MAY be appended to this trap: - Systems with the Host Resources MIB (RFC 2790) MAY add 'hrSystemDate' (compare to IPP 'printer-current-time') - Systems MAY add other variable-bindings from any MIB | ||
| xcmJmxJobCreatedV1Enterprise | 1.3.6.1.4.1.253.8.83.2.3 | The value of the enterprise-specific OID in an SNMPv1 trap for a Job created event sent by this managed system. | ||
| xcmJmxJobCreatedV2TrapPrefix | 1.3.6.1.4.1.253.8.83.2.3.0 | |||
| NTF xcmJmxJobCreatedV2Trap | 1.3.6.1.4.1.253.8.83.2.3.0.1 | This SMIv2 trap corresponds to IPP 'job-created' event. | ||
| xcmJmxJobCompletedV1Enterprise | 1.3.6.1.4.1.253.8.83.2.4 | The value of the enterprise-specific OID in an SNMPv1 trap for a Job completed event sent by this managed system. | ||
| xcmJmxJobCompletedV2TrapPrefix | 1.3.6.1.4.1.253.8.83.2.4.0 | |||
| NTF xcmJmxJobCompletedV2Trap | 1.3.6.1.4.1.253.8.83.2.4.0.1 | This SMIv2 trap corresponds to IPP 'job-completed' event. | ||
| xcmJmxJobStoppedV1Enterprise | 1.3.6.1.4.1.253.8.83.2.5 | The value of the enterprise-specific OID in an SNMPv1 trap for a Job stopped event sent by this managed system. | ||
| xcmJmxJobStoppedV2TrapPrefix | 1.3.6.1.4.1.253.8.83.2.5.0 | |||
| NTF xcmJmxJobStoppedV2Trap | 1.3.6.1.4.1.253.8.83.2.5.0.1 | This SMIv2 trap corresponds to IPP 'job-stopped' event. | ||
| xcmJmxJobConfigV1Enterprise | 1.3.6.1.4.1.253.8.83.2.6 | The value of the enterprise-specific OID in an SNMPv1 trap for a Job config changed event sent by this managed system. | ||
| xcmJmxJobConfigV2TrapPrefix | 1.3.6.1.4.1.253.8.83.2.6.0 | |||
| NTF xcmJmxJobConfigV2Trap | 1.3.6.1.4.1.253.8.83.2.6.0.1 | This SMIv2 trap corresponds to IPP 'job-config-changed' event. | ||
| xcmJmxJobProgressV1Enterprise | 1.3.6.1.4.1.253.8.83.2.7 | The value of the enterprise-specific OID in an SNMPv1 trap for a Job progress event sent by this managed system. | ||
| xcmJmxJobProgressV2TrapPrefix | 1.3.6.1.4.1.253.8.83.2.7.0 | |||
| NTF xcmJmxJobProgressV2Trap | 1.3.6.1.4.1.253.8.83.2.7.0.1 | This SMIv2 trap corresponds to an IPP 'job-progress' event. | ||
| xcmJmxMIBConformance | 1.3.6.1.4.1.253.8.83.3 | |||
| xcmJmxMIBCompliance | 1.3.6.1.4.1.253.8.83.3.1 | The compliance statement for agents that implement this Job Admin MIB. | ||
| xcmJmxMIBObjectGroups | 1.3.6.1.4.1.253.8.83.3.2 | |||
| xcmJmxGeneralGroup | 1.3.6.1.4.1.253.8.83.3.2.1 | The general group. | ||
| xcmJmxJobAdminGroup | 1.3.6.1.4.1.253.8.83.3.2.2 | The job administration group. | ||
| xcmJmxMIBTrapGroups | 1.3.6.1.4.1.253.8.83.3.3 |
3,350 OIDs total — showing 2,973-3,350 (page 2 of 2)
« Prev Page 2 of 2