All MIBs › XEDIA-SSHD-MIB › xsshdCfgAdminStatus
xsshdCfgAdminStatus
Module: XEDIA-SSHD-MIB
OID (symbolic): XEDIA-SSHD-MIB::xsshdCfgAdminStatus
OID (numeric): 1.3.6.1.4.1.838.3.35.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The administrative status of Secure Shell in the router. The value of: 'enabled' - indicates that the ssh daemon will process requests from clients. If there are enough node resources, and the host/user pass authentication, then the user will be allowed to log into the CL.I 'disable' - indicates that the ssh daemon will not process requests from clients. Existing sessions will not be torn down. 'testing' - will process requests from clients, and periodically output a test pattern if the client is authenticated. 'disabledDown' - indicates that the ssh daemon will not process requests from clients, and, at system initialization, the ssh daemon will NOT be started. This can be used to free up node resources if ssh is not going to be used. Existing sessions will not be torn down.
The ssh daemon can only be started at intialization time. So, if it was set to 'disabledDown' and the daemon never started, a full node boot will be required to enable the ssh daemon.
What is xsshdCfgAdminStatus?
Sets the administrative mode of the SSH daemon on this router - enabled to accept client logins, disabled to reject new connections without dropping existing ones, testing to also emit a periodic test pattern to authenticated clients, or disabledDown to also skip starting the daemon at boot to free node resources, which then requires a full reboot to re-enable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.35.1.1.1.1 snmpwalk -v2c -c public <target> XEDIA-SSHD-MIB::xsshdCfgAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.35.1.1.1.1.1 snmpget -v2c -c public <target> XEDIA-SSHD-MIB::xsshdCfgAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.838.3.35.1.1.1.1.1 i <value>
Start monitoring Xedia AP access point, Xedia router (SSHD session-count/failed-login-event status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-SSHD-MIB::xsshdCfgAdminStatus OID value, configure state conditions and alerts, and monitor any Xedia AP access point, Xedia router (SSHD session-count/failed-login-event status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.838 | xedia | XEDIA-REG |
| 1.3.6.1.4.1.838.3 | xediaMibs | XEDIA-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.838.3.35 | xediaSshDMIB | XEDIA-SSHD-MIB |
| 1.3.6.1.4.1.838.3.35.1 | xSshDObjects | XEDIA-SSHD-MIB |
| 1.3.6.1.4.1.838.3.35.1.1 | xSshDGlobal | XEDIA-SSHD-MIB |
| 1.3.6.1.4.1.838.3.35.1.1.1 | xSshDGlobalCfg | XEDIA-SSHD-MIB |
| 1.3.6.1.4.1.838.3.35.1.1.1.1 | xsshdCfgAdminStatus | XEDIA-SSHD-MIB |