All MIBs › XEDIA-PPP-MP-MIB › mpBundleConfigRcvShortSeq
mpBundleConfigRcvShortSeq
Module: XEDIA-PPP-MP-MIB
OID (symbolic): XEDIA-PPP-MP-MIB::mpBundleConfigRcvShortSeq
OID (numeric): 1.3.6.1.4.1.838.3.21.1.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If enabled(1) then the local peer will attempt to negotiate Short Sequence Number Header Format for the MP encapsulated PPP traffic sent from the remote peer to the local peer.
If disabled(2) then no attempt to negotiate Short Sequence Numbers will be performed, indicating that instead the default Long Sequence Number Fragment Format should be used for all traffic sent by the remote peer to the local peer.
This setting has no effect on the negotation of Short Sequence Number Header Format for the traffic flowing in the opposite direction (from the local peer to the remote peer). The use of Short Sequence Number Fragment Format on that traffic will be determined by whatever the remote peer proposes.
Changing this object will have effect when the link is next restarted (either by toggling ifAdminStatus for this interface down and then up again, or by rebooting the entire system).
After the link comes up, the status variable mpBundleStatusLocalMRRU will reflect the actual MRRU negotiated with the peer during LCP negotiation.
What is mpBundleConfigRcvShortSeq?
Controls whether the local peer will try to negotiate Short Sequence Number Header Format for MP traffic sent from the remote peer to it (default enabled); disabling it forces the default Long Sequence Number format instead. It only affects that one direction and takes effect on the next link restart.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.21.1.1.2.1.3 snmpwalk -v2c -c public <target> XEDIA-PPP-MP-MIB::mpBundleConfigRcvShortSeq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.21.1.1.2.1.3.1 snmpget -v2c -c public <target> XEDIA-PPP-MP-MIB::mpBundleConfigRcvShortSeq.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.838.3.21.1.1.2.1.3.1 i <value>
Start monitoring Xedia multiservice access router (PPP Multilink Protocol bundle/fragment-reassembly-error status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-PPP-MP-MIB::mpBundleConfigRcvShortSeq OID value, configure state conditions and alerts, and monitor any Xedia multiservice access router (PPP Multilink Protocol bundle/fragment-reassembly-error status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.838 | xedia | XEDIA-REG |
| 1.3.6.1.4.1.838.3 | xediaMibs | XEDIA-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.838.3.21 | xediaPppMpMIB | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1 | xediaPppMpObjects | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1 | mpBundle | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1.2 | mpBundleConfigTable | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1.2.1 | mpBundleConfigEntry | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1.2.1.3 | mpBundleConfigRcvShortSeq | XEDIA-PPP-MP-MIB |