All MIBs › XEDIA-PPP-MP-MIB › mpBundleConfigLocalEndptDiscr
mpBundleConfigLocalEndptDiscr
Module: XEDIA-PPP-MP-MIB
OID (symbolic): XEDIA-PPP-MP-MIB::mpBundleConfigLocalEndptDiscr
OID (numeric): 1.3.6.1.4.1.838.3.21.1.1.2.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The value to be advertised to the remote peer as the Endpoint Discriminator to be used to identify this Multilink PPP bundle.
After the remote peer has received this value, it should include this value during LCP negotiation of any new links intended to join this Multilink PPP bundle.
The first byte in the string identifies the Class of the Endpoint Discriminator. The remaining bytes in the string contain the actual Endpoint Discriminator value.
If the value of this variable is 0 then the local peer will use the MAC address of the local box as the value to advertise as the local Endpoint Discriminator.
After the link comes up, the status variable mpBundleStatusLocalEndptDiscr will reflect this Endpoint Discriminator value which has been sent to the peer (i.e. this value is not negotiated with the peer, the peer must accept whatever Endpoint Discriminator we send to them).
What is mpBundleConfigLocalEndptDiscr?
The Endpoint Discriminator value this local peer advertises to identify its Multilink PPP bundle to the remote peer during LCP negotiation of new links; a value of 0 falls back to using the local box's MAC address, and the value actually sent is not negotiated — the peer must accept whatever is configured here.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.21.1.1.2.1.2 snmpwalk -v2c -c public <target> XEDIA-PPP-MP-MIB::mpBundleConfigLocalEndptDiscr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.21.1.1.2.1.2.1 snmpget -v2c -c public <target> XEDIA-PPP-MP-MIB::mpBundleConfigLocalEndptDiscr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.838.3.21.1.1.2.1.2.1 s <value>
Start monitoring Xedia multiservice access router (PPP Multilink Protocol bundle/fragment-reassembly-error status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-PPP-MP-MIB::mpBundleConfigLocalEndptDiscr OID value, configure state conditions and alerts, and monitor any Xedia multiservice access router (PPP Multilink Protocol bundle/fragment-reassembly-error status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.838 | xedia | XEDIA-REG |
| 1.3.6.1.4.1.838.3 | xediaMibs | XEDIA-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.838.3.21 | xediaPppMpMIB | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1 | xediaPppMpObjects | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1 | mpBundle | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1.2 | mpBundleConfigTable | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1.2.1 | mpBundleConfigEntry | XEDIA-PPP-MP-MIB |
| 1.3.6.1.4.1.838.3.21.1.1.2.1.2 | mpBundleConfigLocalEndptDiscr | XEDIA-PPP-MP-MIB |