All MIBs › Wellfleet-SYSL-MIB › wfSyslogHostTimeSeqEnable
wfSyslogHostTimeSeqEnable
Module: Wellfleet-SYSL-MIB
OID (symbolic): Wellfleet-SYSL-MIB::wfSyslogHostTimeSeqEnable
OID (numeric): 1.3.6.1.4.1.18.3.3.2.15.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If wfSyslogLogTimeSeqEnable is set to enabled then the syslog application will transmit the messages to the remote host in time sequenced order(This is not guaranteed however because the UDP transport mechanism is connectionless, an thus, unreliable. The possibility exists for messages to be lost or delivered out of sequence ) If this attribute is disabled then messages will be sent to the remote host in the order that they occur on each slot( i.e. no aggragation of the messages across slots will be performed ) NOTE: If this value is changed while this host is enabled then the possiblity exists such that the remote host could receive duplicate log messages or worse log messages may not be sent to the remote host. The best procedure to follow would be to disable the the remote host's MIB record, then set this value and then enable this host's MIB record again.
What is wfSyslogHostTimeSeqEnable?
Controls whether messages to this remote host are sent in time-sequenced order across slots (enabled) or simply in per-slot occurrence order with no cross-slot aggregation (disabled, the default); changing it on a currently-enabled host risks duplicate or dropped messages, so disable the host first, change this value, then re-enable it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.3.2.15.2.1.6 snmpwalk -v2c -c public <target> Wellfleet-SYSL-MIB::wfSyslogHostTimeSeqEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.3.2.15.2.1.6.1 snmpget -v2c -c public <target> Wellfleet-SYSL-MIB::wfSyslogHostTimeSeqEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.3.2.15.2.1.6.1 i <value>
Start monitoring Wellfleet/Bay Networks multiprotocol router (syslog severity-filter/destination config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-SYSL-MIB::wfSyslogHostTimeSeqEnable OID value, configure state conditions and alerts, and monitor any Wellfleet/Bay Networks multiprotocol router (syslog severity-filter/destination config status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.18 | wellfleet | CMU-MIB |
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.3 | wfSystem | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.3.2 | wfServices | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.3.2.15 | wfSyslogGroup | Wellfleet-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3.3.2.15.2 | wfSyslogHostTable | Wellfleet-SYSL-MIB |
| 1.3.6.1.4.1.18.3.3.2.15.2.1 | wfSyslogHostEntry | Wellfleet-SYSL-MIB |
| 1.3.6.1.4.1.18.3.3.2.15.2.1.6 | wfSyslogHostTimeSeqEnable | Wellfleet-SYSL-MIB |