Wellfleet-NAT-MIB :: wfNatBaseLogMask

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Wellfleet-NAT-MIB › wfNatBaseLogMask

wfNatBaseLogMask

Module: Wellfleet-NAT-MIB

OID (symbolic): Wellfleet-NAT-MIB::wfNatBaseLogMask

OID (numeric): 1.3.6.1.4.1.18.3.5.3.2.7.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: A parameter to specify which NAT log messages should be logged.
Each bit represents a message as defined below.  A 1 in that
bit location means to log it and a 0 means not to put that
log message in the log.  Changing this value will NOT restart
NAT, but will take effct immediately(if there are any messages
to be logged.

bit 31                                bit 0
+---------------------------------------+
|                                       |
+---------------------------------------+


NAT_DBG_MIB_LOG                 0x00000001
NAT_DBG_IP_LOG                  0x00000002
NAT_DBG_FWD_LOG                 0x00000004
NAT_DBG_MAPPING_LOG             0x00000008
NAT_DBG_AGING_LOG               0x00000010
NAT_DBG_SYNCH_LOG               0x00000020

What is wfNatBaseLogMask?

Sets a bitmask that controls which categories of NAT debug messages get logged (e.g. bit 0x00000001 for MIB access, 0x00000008 for mapping events, 0x00000020 for synchronization); an admin can turn on just the bits needed to diagnose a specific NAT issue, since the change takes effect immediately without restarting NAT.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.2.7.1.6
snmpwalk -v2c -c public <target> Wellfleet-NAT-MIB::wfNatBaseLogMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.2.7.1.6.1
snmpget -v2c -c public <target> Wellfleet-NAT-MIB::wfNatBaseLogMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.5.3.2.7.1.6.1 i <value>

Start monitoring Wellfleet router, Bay Networks/Nortel router (NAT translation-table/session-usage status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-NAT-MIB::wfNatBaseLogMask OID value, configure state conditions and alerts, and monitor any Wellfleet router, Bay Networks/Nortel router (NAT translation-table/session-usage status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.18wellfleetCMU-MIB
1.3.6.1.4.1.18.3wfSwSeries7Wellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5wfApplicationWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5.3wfInternetWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5.3.2wfIpRoutingWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5.3.2.7wfNatGroupWellfleet-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.18.3.5.3.2.7.1wfNatBaseWellfleet-NAT-MIB
1.3.6.1.4.1.18.3.5.3.2.7.1.6wfNatBaseLogMaskWellfleet-NAT-MIB