All MIBs › Wellfleet-IPEX-MIB › wfIpexMappingMsgHdrType
wfIpexMappingMsgHdrType
Module: Wellfleet-IPEX-MIB
OID (symbolic): Wellfleet-IPEX-MIB::wfIpexMappingMsgHdrType
OID (numeric): 1.3.6.1.4.1.18.3.5.15.2.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute enables the Message Boundary Protocol. When enabled, this bit is used to mark the boundary of TCP application data that is consistent with Gateway Operation. The first three message header types are used only with wfIpexMappingCtlMode in gateway mode. The default value is used with wfIpexMappingCtlMode in the local or end2end mode of operation. NONE = Msg Boundary Protocol is off, no msg header. SHORT = Msg header condtains a 2-Byte length field. LONG = Msg header contains a 1-Byte type, 1-Byte version, and a 2-Byte length fields. FULL = Msg Header contains a 2-Byte length1 field, 1-Byte Version field, 1-Byte Type field and, a 1-Byte length2 field
What is wfIpexMappingMsgHdrType?
Selects the Message Boundary Protocol header format used to mark TCP application data boundaries in gateway mode: none, short, long, or full; the first three only apply when wfIpexMappingCtrlMode is gateway, while full is the default used in local or end2end mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.15.2.1.22 snmpwalk -v2c -c public <target> Wellfleet-IPEX-MIB::wfIpexMappingMsgHdrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.15.2.1.22.1 snmpget -v2c -c public <target> Wellfleet-IPEX-MIB::wfIpexMappingMsgHdrType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.5.15.2.1.22.1 i <value>
Start monitoring Wellfleet Communications / Bay Networks router (extended IP routing-policy config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-IPEX-MIB::wfIpexMappingMsgHdrType OID value, configure state conditions and alerts, and monitor any Wellfleet Communications / Bay Networks router (extended IP routing-policy config status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.18 | wellfleet | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5 | wfApplication | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.15 | wfIpexGroup | Wellfleet-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3.5.15.2 | wfIpexMappingTable | Wellfleet-IPEX-MIB |
| 1.3.6.1.4.1.18.3.5.15.2.1 | wfIpexMappingEntry | Wellfleet-IPEX-MIB |
| 1.3.6.1.4.1.18.3.5.15.2.1.22 | wfIpexMappingMsgHdrType | Wellfleet-IPEX-MIB |