Wellfleet-INT-SERV-MIB :: wfTxLineRscCfgResvLatency

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWellfleet-INT-SERV-MIBwfTxLineRscCfgResvLatency

wfTxLineRscCfgResvLatency

Module: Wellfleet-INT-SERV-MIB

OID (symbolic): Wellfleet-INT-SERV-MIB::wfTxLineRscCfgResvLatency

OID (numeric): 1.3.6.1.4.1.18.3.5.16.2.1.3.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The maximum latency acceptable for a reserved flow packet. This parameter limits the amount of unreserved data that the link scheduler can put onto the driver transmit ring. When the data on the transmit ring reaches a size where additional unreserved data would take longer than the value of this parameter to clock out, no more data will be enqueued. Reduce this parameter to obtain better delay characteristics for reserved flows, but note that this will result in somewhat reduced overall throughput. Units are milliseconds.

What is wfTxLineRscCfgResvLatency?

Sets the maximum acceptable latency, in milliseconds, for a reserved-flow packet by limiting how much unreserved data can sit on the transmit ring ahead of it. An admin lowers this to tighten delay guarantees for latency-sensitive reserved traffic, accepting a modest reduction in overall throughput as a tradeoff.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.16.2.1.3.1.13
snmpwalk -v2c -c public <target> Wellfleet-INT-SERV-MIB::wfTxLineRscCfgResvLatency

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.16.2.1.3.1.13.1
snmpget -v2c -c public <target> Wellfleet-INT-SERV-MIB::wfTxLineRscCfgResvLatency.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.5.16.2.1.3.1.13.1 i <value>

Start monitoring Wellfleet/Bay Networks routers configured for Integrated Services QoS/RSVP (flow-admission/reservation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-INT-SERV-MIB::wfTxLineRscCfgResvLatency OID value, configure state conditions and alerts, and monitor any Wellfleet/Bay Networks routers configured for Integrated Services QoS/RSVP (flow-admission/reservation status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.18wellfleetWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3wfSwSeries7Wellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5wfApplicationWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5.16wfIntegratedServicesGroupWellfleet-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.18.3.5.16.2wfReservationsResourcesGroupWellfleet-INT-SERV-MIB
1.3.6.1.4.1.18.3.5.16.2.1wfTxLineRscGroupWellfleet-INT-SERV-MIB
1.3.6.1.4.1.18.3.5.16.2.1.3wfTxLineRscCfgTableWellfleet-INT-SERV-MIB
1.3.6.1.4.1.18.3.5.16.2.1.3.1wfTxLineRscCfgEntryWellfleet-INT-SERV-MIB
1.3.6.1.4.1.18.3.5.16.2.1.3.1.13wfTxLineRscCfgResvLatencyWellfleet-INT-SERV-MIB