All MIBs › Wellfleet-EGP-MIB › wfEgpCfgNeighDisable
wfEgpCfgNeighDisable
Module: Wellfleet-EGP-MIB
OID (symbolic): Wellfleet-EGP-MIB::wfEgpCfgNeighDisable
OID (numeric): 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/Disable parameter. Users perforn an SNMP SET operation on this object to enable/disable an EGP Neighbor relationship with the specified local IP address. Default is enabled. This variable is also used to trigger operator-initiated Start and Stop events in the EGP FSM. It takes the place of the egpNeighEventTrigger variable. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise. This parameter is part of MIB 2. NOTE: The FSM is only affected if EGP is Enabled on the slot.
What is wfEgpCfgNeighDisable?
Enables or disables this specific EGP neighbor relationship and, by doing so, also triggers a Start or Stop event in the RFC 904 EGP state machine: disabling forces the neighbor back to Idle, and enabling kicks off or restarts neighbor acquisition; this only has an effect if EGP itself is enabled on the slot via wfEgpDisable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2 snmpwalk -v2c -c public <target> Wellfleet-EGP-MIB::wfEgpCfgNeighDisable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2.1 snmpget -v2c -c public <target> Wellfleet-EGP-MIB::wfEgpCfgNeighDisable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2.1 i <value>
Start monitoring Wellfleet/Bay Networks router, legacy (EGP neighbor-session/reachability status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-EGP-MIB::wfEgpCfgNeighDisable OID value, configure state conditions and alerts, and monitor any Wellfleet/Bay Networks router, legacy (EGP neighbor-session/reachability status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.18 | wellfleet | CMU-MIB |
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5 | wfApplication | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3 | wfInternet | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3.2 | wfIpRouting | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3.2.4 | wfEgpGroup | Wellfleet-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.4.3 | wfEgpCfgNeighTable | Wellfleet-EGP-MIB |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1 | wfEgpCfgNeighEntry | Wellfleet-EGP-MIB |
| 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2 | wfEgpCfgNeighDisable | Wellfleet-EGP-MIB |