All MIBs › WWP-SYSTEM-MIB › wwpSystemCfgControl
wwpSystemCfgControl
Module: WWP-SYSTEM-MIB
OID (symbolic): WWP-SYSTEM-MIB::wwpSystemCfgControl
OID (numeric): 1.3.6.1.4.1.6141.2.2.1.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot.
updatePasswords: to update the current password file with the new password file. The new passwords will become active immediately.
updateSnmpCfg: to update the current snmp configuration data. The new configuration will become active immediately.
mfgDefaultCfg: Set system configuration to factory defaults. Note: this will wipe out all of the current configuration including Password and VLAN information.
If the system doesn't support any of these control configuration option, it should return error while trying to set this object to the specific option.
A read on this object should return none(0).
What is wwpSystemCfgControl?
This is a command object used to trigger configuration management actions on the device, such as saving changes persistently, updating passwords, updating SNMP configuration, or resetting to factory defaults. Admins use it carefully since the mfgDefaultCfg option wipes all current configuration including passwords and VLAN information, so it should only be used deliberately. After making SNMP-related changes via SNMP SET operations, an admin would set wwpSystemCfgControl to updateSnmpCfg(3) to make those changes take effect immediately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.2.1.4.1 snmpwalk -v2c -c public <target> WWP-SYSTEM-MIB::wwpSystemCfgControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.2.1.4.1.1 snmpget -v2c -c public <target> WWP-SYSTEM-MIB::wwpSystemCfgControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.2.1.4.1.1 i <value>
Start monitoring World Wide Packets metro-Ethernet switches (system uptime/hardware-health/firmware-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-SYSTEM-MIB::wwpSystemCfgControl OID value, configure state conditions and alerts, and monitor any World Wide Packets metro-Ethernet switches (system uptime/hardware-health/firmware-version status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.2 | wwpSystemMIB | WWP-SYSTEM-MIB |
| 1.3.6.1.4.1.6141.2.2.1 | wwpSystemMIBObjects | WWP-SYSTEM-MIB |
| 1.3.6.1.4.1.6141.2.2.1.4 | wwpSystemCfg | WWP-SYSTEM-MIB |
| 1.3.6.1.4.1.6141.2.2.1.4.1 | wwpSystemCfgControl | WWP-SYSTEM-MIB |