WWP-SYSTEM-CONTROL-MIB :: wwpSysCtrlLacpEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WWP-SYSTEM-CONTROL-MIB › wwpSysCtrlLacpEnable

wwpSysCtrlLacpEnable

Module: WWP-SYSTEM-CONTROL-MIB

OID (symbolic): WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlLacpEnable

OID (numeric): 1.3.6.1.4.1.6141.2.30.1.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: when this object is set to 'true' the Lacp operation for the device is enabled. Setting this object to 'false' disable the Lacp operations.

What is wwpSysCtrlLacpEnable?

Setting this object to true(1) enables Link Aggregation Control Protocol (LACP) operation on the device, while setting it to false(2), the default, disables LACP negotiation. An administrator enables this before configuring a link aggregation group (LAG) that dynamically negotiates membership with a connected switch, rather than relying on static aggregation. For example, setting wwpSysCtrlLacpEnable to true(1) lets this switch dynamically negotiate a LAG with an upstream switch instead of requiring manual static trunk configuration on both ends.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.30.1.1.2
snmpwalk -v2c -c public <target> WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlLacpEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.30.1.1.2.1
snmpget -v2c -c public <target> WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlLacpEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.30.1.1.2.1 s <value>

Start monitoring World Wide Packets Ethernet access/aggregation switches (reboot/software-reset control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlLacpEnable OID value, configure state conditions and alerts, and monitor any World Wide Packets Ethernet access/aggregation switches (reboot/software-reset control status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.30wwpSysCtrlMIBWWP-SYSTEM-CONTROL-MIB
1.3.6.1.4.1.6141.2.30.1wwpSysCtrlMIBObjectsWWP-SYSTEM-CONTROL-MIB
1.3.6.1.4.1.6141.2.30.1.1wwpSysCtrlWWP-SYSTEM-CONTROL-MIB
1.3.6.1.4.1.6141.2.30.1.1.2wwpSysCtrlLacpEnableWWP-SYSTEM-CONTROL-MIB