All MIBs › WWP-SYSTEM-CONTROL-MIB › wwpSysCtrlBridgeRSTPEnable
wwpSysCtrlBridgeRSTPEnable
Module: WWP-SYSTEM-CONTROL-MIB
OID (symbolic): WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlBridgeRSTPEnable
OID (numeric): 1.3.6.1.4.1.6141.2.30.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: when this object is set to 'true' the rstp operation for the bridge is enabled. Setting this object to 'false' disable bridge rstp operations.
What is wwpSysCtrlBridgeRSTPEnable?
Setting this object to true(1) enables Rapid Spanning Tree Protocol (RSTP) operation for the bridge, while setting it to false(2), the default, disables RSTP loop-prevention on the device. An administrator enables this on a switch participating in a redundant Layer 2 topology to prevent bridging loops while getting RSTP's faster convergence compared to legacy STP. For example, setting wwpSysCtrlBridgeRSTPEnable to true(1) on a switch with two uplinks to the core lets RSTP quickly block the redundant path and prevent a broadcast storm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.30.1.1.1 snmpwalk -v2c -c public <target> WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlBridgeRSTPEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.30.1.1.1.1 snmpget -v2c -c public <target> WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlBridgeRSTPEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.30.1.1.1.1 s <value>
Start monitoring World Wide Packets Ethernet access/aggregation switches (reboot/software-reset control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-SYSTEM-CONTROL-MIB::wwpSysCtrlBridgeRSTPEnable OID value, configure state conditions and alerts, and monitor any World Wide Packets Ethernet access/aggregation switches (reboot/software-reset control status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.30 | wwpSysCtrlMIB | WWP-SYSTEM-CONTROL-MIB |
| 1.3.6.1.4.1.6141.2.30.1 | wwpSysCtrlMIBObjects | WWP-SYSTEM-CONTROL-MIB |
| 1.3.6.1.4.1.6141.2.30.1.1 | wwpSysCtrl | WWP-SYSTEM-CONTROL-MIB |
| 1.3.6.1.4.1.6141.2.30.1.1.1 | wwpSysCtrlBridgeRSTPEnable | WWP-SYSTEM-CONTROL-MIB |