All MIBs › WWP-SYSLOG-MIB › wwpSyslogSeverity
wwpSyslogSeverity
Module: WWP-SYSLOG-MIB
OID (symbolic): WWP-SYSLOG-MIB::wwpSyslogSeverity
OID (numeric): 1.3.6.1.4.1.6141.2.27.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The syslog severity is box-wide regardless of the output device listed when actually logging a message (e.g., console, syslog, flash), the message will ALWAYS be sent to syslog if the syslog severity is in line with the incoming message severity (verbosity).
Any syslog message with a severity value greater than this value will be ignored by the agent. note: serverity level numeric values increase as their severity decreases, e.g. error(3) is more severe than debug(7).
What is wwpSyslogSeverity?
This read-write object sets the box-wide syslog severity threshold, using the standard eight-level syslog scale from logEmergency(0) to logDebugging(7), where the numeric value increases as severity decreases. Per its description, any message with a severity value greater than this setting is ignored by the agent, so admins use it to control how verbose the device's syslog output is regardless of which output device (console, syslog server, flash) receives it. For example, setting this to logWarnings(4) means informational and debug messages are suppressed while warnings, errors, critical, alert, and emergency messages are still sent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.27.1.1.1 snmpwalk -v2c -c public <target> WWP-SYSLOG-MIB::wwpSyslogSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.27.1.1.1.1 snmpget -v2c -c public <target> WWP-SYSLOG-MIB::wwpSyslogSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.27.1.1.1.1 i <value>
Start monitoring World Wide Packets Ethernet access/aggregation switches (syslog severity-threshold/facility/destination config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-SYSLOG-MIB::wwpSyslogSeverity OID value, configure state conditions and alerts, and monitor any World Wide Packets Ethernet access/aggregation switches (syslog severity-threshold/facility/destination config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.27 | wwpSyslogMib | WWP-SYSLOG-MIB |
| 1.3.6.1.4.1.6141.2.27.1 | wwpSyslogObjects | WWP-SYSLOG-MIB |
| 1.3.6.1.4.1.6141.2.27.1.1 | wwpSyslog | WWP-SYSLOG-MIB |
| 1.3.6.1.4.1.6141.2.27.1.1.1 | wwpSyslogSeverity | WWP-SYSLOG-MIB |