WWP-OAM-MIB :: wwpOamVariableResponseTx

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWWP-OAM-MIBwwpOamVariableResponseTx

wwpOamVariableResponseTx

Module: WWP-OAM-MIB

OID (symbolic): WWP-OAM-MIB::wwpOamVariableResponseTx

OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.4.1.9

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the number of Variable Response OAMPDUs transmitted on this interface.

An Variable Response OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Variable Response code.

Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.

What is wwpOamVariableResponseTx?

This OID counts Variable Response OAMPDUs transmitted on this interface, sent in reply to a peer's Variable Request. An admin compares this against wwpOamVariableRequestRx to confirm every incoming variable request actually got answered.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.4.1.9
snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamVariableResponseTx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.4.1.9.1
snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamVariableResponseTx.1

Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamVariableResponseTx OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.400wwpOamMibModuleWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1wwpOamMIBWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2wwpOamObjsWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2.4wwpOamStatsTableWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2.4.1wwpOamStatsEntryWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2.4.1.9wwpOamVariableResponseTxWWP-OAM-MIB