All MIBs › WWP-OAM-MIB › wwpOamPeerMode
wwpOamPeerMode
Module: WWP-OAM-MIB
OID (symbolic): WWP-OAM-MIB::wwpOamPeerMode
OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the last Information OAMPDU received from the peer. This value is initialized to unknown(3), and is not valid if the wwpOamPeerStatus is inactive.
An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs.
What is wwpOamPeerMode?
This OID reports whether the OAM peer is operating in active(1) or passive(2) mode, as learned from its Information OAMPDU, or unknown(3) before that's been determined. An admin checks this to confirm the two ends of a link aren't both configured passive, which would prevent OAM discovery from completing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.2.1.5 snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamPeerMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.2.1.5.1 snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamPeerMode.1
Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamPeerMode OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | wwpOamMibModule | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1 | wwpOamMIB | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2 | wwpOamObjs | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2 | wwpOamPeerTable | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1 | wwpOamPeerEntry | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.5 | wwpOamPeerMode | WWP-OAM-MIB |