All MIBs › WWP-OAM-MIB › wwpOamPeerMaxOamPduSize
wwpOamPeerMaxOamPduSize
Module: WWP-OAM-MIB
OID (symbolic): WWP-OAM-MIB::wwpOamPeerMaxOamPduSize
OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.2.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The maximum OAMPDU size can be determined from the PDU Configuration field of the Local Information TLV of the last Information OAMPDU received from the peer. This value is initialized to 64, and is invalid if the wwpOamPeerStatus is inactive.
An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs.
What is wwpOamPeerMaxOamPduSize?
This OID reports the maximum OAMPDU size, in bytes, the peer OAM entity supports, learned from its Information OAMPDU and initialized to 64 until a peer is discovered. An admin compares this with wwpMaxOamPduSize to understand what OAMPDU size limit actually governs this link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.2.1.6 snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamPeerMaxOamPduSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.2.1.6.1 snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamPeerMaxOamPduSize.1
Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamPeerMaxOamPduSize OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | wwpOamMibModule | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1 | wwpOamMIB | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2 | wwpOamObjs | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2 | wwpOamPeerTable | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1 | wwpOamPeerEntry | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.6 | wwpOamPeerMaxOamPduSize | WWP-OAM-MIB |