All MIBs › WWP-OAM-MIB › wwpOamPeerFunctionsSupported
wwpOamPeerFunctionsSupported
Module: WWP-OAM-MIB
OID (symbolic): WWP-OAM-MIB::wwpOamPeerFunctionsSupported
OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.2.1.8
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to these functions. This value is initialized so all bits are clear, and is invalid if the wwpOamPeerStatus is inactive.
The capbilities of the OAM peer can be determined from the configuration field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV.
An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs.
What is wwpOamPeerFunctionsSupported?
This OID is a bitmask reporting which optional OAM feature sets, such as loopbackSupport(1) or eventSupport(2), the remote OAM peer has advertised as supported. An admin checks this before attempting a remote loopback test, since the peer must have loopbackSupport set here for the command to have any effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.2.1.8 snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamPeerFunctionsSupported
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.2.1.8.1 snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamPeerFunctionsSupported.1
Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamPeerFunctionsSupported OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | wwpOamMibModule | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1 | wwpOamMIB | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2 | wwpOamObjs | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2 | wwpOamPeerTable | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1 | wwpOamPeerEntry | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.2.1.8 | wwpOamPeerFunctionsSupported | WWP-OAM-MIB |