All MIBs › WWP-OAM-MIB › wwpOamLoopbackControlRx
wwpOamLoopbackControlRx
Module: WWP-OAM-MIB
OID (symbolic): WWP-OAM-MIB::wwpOamLoopbackControlRx
OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.4.1.6
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: A count of the number of Loopback Control OAMPDUs transmitted on this interface.
An Loopback Control OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Loopback Control code.
Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
What is wwpOamLoopbackControlRx?
This OID counts Loopback Control OAMPDUs received on this interface, indicating the remote peer has requested a loopback start or stop. An admin monitoring this on a customer-facing port can see whether the remote CPE is attempting to initiate its own loopback tests.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.4.1.6 snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamLoopbackControlRx
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.4.1.6.1 snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamLoopbackControlRx.1
Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamLoopbackControlRx OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | wwpOamMibModule | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1 | wwpOamMIB | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2 | wwpOamObjs | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.4 | wwpOamStatsTable | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1 | wwpOamStatsEntry | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.6 | wwpOamLoopbackControlRx | WWP-OAM-MIB |