WWP-OAM-MIB :: wwpOamErrFrameSecsEvNotifEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWWP-OAM-MIBwwpOamErrFrameSecsEvNotifEnable

wwpOamErrFrameSecsEvNotifEnable

Module: WWP-OAM-MIB

OID (symbolic): WWP-OAM-MIB::wwpOamErrFrameSecsEvNotifEnable

OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.6.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates whether the occurence of an Errored Frame Seconds Summary Event should result in an Event Notification OAMPDU generated by the OAM layer.

By default, this object should have the value disabled(2) for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the wwpOamFunctionsSupported attribute), this value is ignored.

What is wwpOamErrFrameSecsEvNotifEnable?

This OID enables or disables sending an Event Notification OAMPDU to the peer whenever an Errored Frame Seconds Summary Event occurs, disabled(2) by default. An admin enables this so the remote OAM peer is proactively told when this interface accumulates too many errored seconds over the configured window.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.6.1.10
snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamErrFrameSecsEvNotifEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.6.1.10.1
snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamErrFrameSecsEvNotifEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.400.1.2.6.1.10.1 i <value>

Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamErrFrameSecsEvNotifEnable OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.400wwpOamMibModuleWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1wwpOamMIBWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2wwpOamObjsWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2.6wwpOamEventConfigTableWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2.6.1wwpOamEventConfigEntryWWP-OAM-MIB
1.3.6.1.4.1.6141.2.400.1.2.6.1.10wwpOamErrFrameSecsEvNotifEnableWWP-OAM-MIB