All MIBs › WWP-OAM-MIB › wwpOamDuplicateEventNotificationTx
wwpOamDuplicateEventNotificationTx
Module: WWP-OAM-MIB
OID (symbolic): WWP-OAM-MIB::wwpOamDuplicateEventNotificationTx
OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.4.1.17
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possiblity that a frame may be lost in transit.
An Event Notification OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Event code.
A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
What is wwpOamDuplicateEventNotificationTx?
This OID counts duplicate Event Notification OAMPDUs transmitted on this interface, retransmissions carrying the same sequence number as the previously sent event, sent to improve delivery odds over an unreliable link. An admin uses this alongside wwpOamUniqueEventNotificationTx to see how much of the local event-signaling traffic is redundant retransmission versus genuinely new events.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.4.1.17 snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamDuplicateEventNotificationTx
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.4.1.17.1 snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamDuplicateEventNotificationTx.1
Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamDuplicateEventNotificationTx OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | wwpOamMibModule | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1 | wwpOamMIB | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2 | wwpOamObjs | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.4 | wwpOamStatsTable | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1 | wwpOamStatsEntry | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.4.1.17 | wwpOamDuplicateEventNotificationTx | WWP-OAM-MIB |