All MIBs › WWP-OAM-MIB › wwpOamCriticalEventEnable
wwpOamCriticalEventEnable
Module: WWP-OAM-MIB
OID (symbolic): WWP-OAM-MIB::wwpOamCriticalEventEnable
OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.6.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the local device should attempt to indicate a critical event fault via the OAMPDU flags field to its peer OAM entity. If the system does not support critical event capability, setting this object has no effect, and reading the object should always result in 'disabled(2)'.
By default, this object should have the value disabled(2) for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the wwpOamFunctionsSupported attribute), this value is ignored.
What is wwpOamCriticalEventEnable?
This OID enables or disables signaling a critical-event condition to the peer via the OAMPDU flags field; if the hardware doesn't support critical-event signaling, this always reads disabled(2) regardless of the setting. An admin enables this so the peer gets immediate notice of a serious local fault condition, distinct from the threshold-based error events.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.6.1.12 snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamCriticalEventEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.6.1.12.1 snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamCriticalEventEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.400.1.2.6.1.12.1 i <value>
Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamCriticalEventEnable OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | wwpOamMibModule | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1 | wwpOamMIB | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2 | wwpOamObjs | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.6 | wwpOamEventConfigTable | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1 | wwpOamEventConfigEntry | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.6.1.12 | wwpOamCriticalEventEnable | WWP-OAM-MIB |