All MIBs › WWP-OAM-MIB › wwpOamAdminState
wwpOamAdminState
Module: WWP-OAM-MIB
OID (symbolic): WWP-OAM-MIB::wwpOamAdminState
OID (numeric): 1.3.6.1.4.1.6141.2.400.1.2.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface.
The wwpOamAdminState always starts in the disabled(1) state until an explicity management action or configuration information retained by the system causes a transition to the enabled(2) state.
Note that the value of this object is ignored when the interface is not operating in full-duplex mode. OAM is not supported on half-duplex links.
What is wwpOamAdminState?
This OID sets the administrative state of 802.3ah Ethernet OAM on this interface, starting disabled(1) until explicit configuration enables it. An admin sets this to enabled(2) to turn on link-level OAM monitoring, noting the setting is ignored on half-duplex links since OAM requires full-duplex.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.1.1.1 snmpwalk -v2c -c public <target> WWP-OAM-MIB::wwpOamAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.400.1.2.1.1.1.1 snmpget -v2c -c public <target> WWP-OAM-MIB::wwpOamAdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.400.1.2.1.1.1.1 i <value>
Start monitoring World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-OAM-MIB::wwpOamAdminState OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Ethernet access device, IEEE 802.3ah-compliant Ethernet equipment (link-fault/OAM-peer-discovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.400 | wwpOamMibModule | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1 | wwpOamMIB | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2 | wwpOamObjs | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.1 | wwpOamTable | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1 | wwpOamEntry | WWP-OAM-MIB |
| 1.3.6.1.4.1.6141.2.400.1.2.1.1.1 | wwpOamAdminState | WWP-OAM-MIB |